10.7 <

Machine status and advanced setup>
Option Description
Authentication
Mode
Network
Accounting
It enables the authentication
mode which is set from the Job
Account menu in the
SyncThru™ Web Admin
Service.
Foreign Device
Interface
When you install the optional
FDI kit, select On to activate it.
•Job Timer: If there is not
enough credit, you can set the
machine to cancel a job right
away or wait a designated
amount of time for a deposit.
•Print Job Control: When it is
enabled, the both computer
printing and copying are
possible since the credit
remains. With Disable, copy
printing needs the credit.
However, when printing a
report or a fax, the credit is not
needed.
•Inhibit Services: When no
credit is left, the machine
disables the copy job only with
Copy Only. With All Service,
scanning service and copy job
are disabled.
•Internal Credits: It is used
when you cancel the job or
when the job is cancelled by
the device due to insufficient
credits (coin) or is canceled by
user’s request. If you select
Enable, the machine deposits
a credit equal to the number
of sheets that did not print out
correctly, then it prints next job
for free (for the amount
deposited). With Disable,
even if you cancel the printing
job, the machine includes
jammed paper in the count
and the cost of printing shall
be recovered for the pages
already billed.
•Image Counter: Depends on
whether the machine counts
blank white pages.
Optional Service
When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate
those features. Follow the next steps to enable those features.
1Press Machine Setup on the control panel.
2Press Admin Setting. When the login message pops up, then enter
password and press OK.
3Press the Setup tab > Optional Service.
Authentication
Mode
(Continue)
No
Authentication
Mode
It disables Authentication
Mode.
Change Admin. Password You can change the password
for the Admin Setting
authentication.
Option Description
N/W Scan Set
Enable
to activate the scanning and
sending it via network.
Analog Fax After installing the fax kit, select this option
Enable
to use this machine as a fax machine.
On Demand
Image Overwrite
You can set the machine to delete previous job
information on HDD as you store new job
information. Set this option to
Enable
, go to the
General tab > On Demand Overwrite, press
Start in the display to start the overwriting job.
Immediate Image
Overwrite
If you select
Enable
, the machine renews the
HDD memory when you save new job on it.
Option Description