3Press Scan from the Main screen.
Note
If the authentication message shows, enter User Name and Password. This message shows only when the network administrator has set the authentication in SyncThru Web Service. (Page 11.9)
4Press NetScan.
5When the authentication message pops up, enter ID and Password. ID and Password that are which you have entered during the configuration of the Network Scan program. (Page 7.6)
When login is completed, the screen shows the NetScan server address which is the networked computer. Additionally, this shows Application list that is configured in Samsung Network Scan Manager.
6Select one from the application list and press Select.
7Press Start on the control panel to start scanning.
8The original will be scanned and sent to your computer.
Scanning originals and sending via SMB/ FTP
(Scan to Server)
You can scan an image and send it to a total of 5 destinations via the SMB or FTP.
Preparation for scanning to SMB/FTP
Select the folder and share it with the machine in order to receive the scanned file.
Note
The next steps are for SMB server setting using SyncThru Web Service, and the setting for FTP server is the same as SMB. Apply the same steps for setting up the FTP server.
1Turn your networked computer on and open the web browser.
2Enter your machine's IP address as the URL in a browser.
3Click Go to access the SyncThru Web Service.
4Click Machine Settings > SMB Setup > Server List. The Server List is then displayed on the right side of the screen.
5Click Add.
6Select the index number from 1 to 20.
7Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine.
8Select IP Address or Host Name.
9Enter the server address in dotted decimal notation or a host name.
10Enter the server port number, from 1 to 65535. The default port number is 139.
11Enter the share name of the server.
12Put a check mark next to in Anonymous if you want to allow the SMB server to be accessed by unauthorized persons.
By default, this is unchecked.
13Enter the login name and password.
14Enter the domain name of the SMB server.
15Enter the location for storing the scanned image. This is the location you entered in step 7.
16Click Apply.
Scanning and sending to SMB/FTP server
1Press Scan from the Main screen.
Note
If the authentication message shows, enter User Name and Password. This message shows only when the network administrator has set the authentication in SyncThru Web Service. (Page 11.9)
2Press Scan to Server.
3Place the originals face up in the DADF. Or you can place a single original document face down on the scanner glass.
4Adjust the document settings in the Image tab.
5Select Duplex and Resolution in the Basic tab.
6Press Scan to Server to show the SMB server list you entered in the SyncThru Web Service.
7Select the destination SMB server.
Note
You can select up to five destinations using both of SMB or FTP servers.
8Press Start on the control panel.
The machine begins scanning and then sends the scanned image to the specified server.
7.7 <Scanning>
