Using the Unified Driver Configurator
Unified Linux Driver Configurator is a tool primarily intended for configuring Printer or MFP devices. Since an MFP device combines the printer and scanner, the Unified Linux Driver Configurator provides options logically grouped for printer and
Printers Configuration
Printers configuration has the two tabs: Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the Unified Driver Configurator window.
scanner functions. There is also a special MFP port option responsible for the regulation of access to an MFP printer and scanner via a single I/O channel.
After installing the Unified Linux driver, the Unified Linux Driver Configurator icon will automatically be created on your desktop.
Opening the Unified Driver
Configurator
1 |
desktop. |
You can also click the Startup Menu icon and select |
Samsung Unified Driver and then Unified Driver |
Switches to Printer configuration.
Shows the status, model name and URI of your printer.
Shows all of the installed printer.
Configurator. |
2 Press each button on the Modules pane to switch to the |
corresponding configuration window. |
Printers Configuration button
Scanners Configuration button (for MFP device only)
Ports Configuration button
You can use the onscreen help by clicking Help.
3After changing the configurations, click Exit to close the Unified Driver Configurator.
You can use the following printer control buttons:
•Refresh: renews the available printers list.
•Add Printer: allows you to add a new printer.
•Remove Printer: removes the selected printer.
•Set as Default: sets the current printer as a default printer.
•Stop/Start: stops/starts the printer.
•Test: allows you to print a test page to check if the machine is working properly.
•Properties: allows you to view and change the printer properties. For details, see page 38.
36
