Electrolux SANTO 3678-6 KA manual Initial Start-Up, Temperature Adjustment

Page 19

Initial Start-Up

01. Insert plug into mains socket.

2.Press ON/OFF button.

3.Set the refrigerator to the desired temperature (see section: "Tempera- ture Adjustment").

Temperature Adjustment

With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted.

01. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

2.To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display.

Each time the button is pressed the temperature is adjusted by 1 °C. Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)

Note: From a food safety point of view, +5 °C for the refrigerator compartment should be considered cold enough as a storage temperature.

3 When the buttons are not further pressed after an adjustment has been made, after a short period (approx. 5 sec.) the temperature display swit- ches over and again displays the ACTUAL temperature in the refrigera- tor. The display changes from flashing to continuous illumination.

The compressor will start and then run automatically.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place.

3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached.

818 20 68-00/0

19

Image 19
Contents Santo 3678-6 KA Berkshire SL 1 1DZ Dear customerHigh Street SloughContents Contents Prior to Installation Important Safety InstructionsChild Safety Packaging When disposing of your old applianceEnvironmental Information Appliance TransportRemove the transport fittings from the storage shelves Before UseFitting the Door Handles Installation Location InstallationAppliance Alignment Refrigerator needs VentilationEarth Electrical ConnectionReversing the Door Installation of the carbon filterPlinth cover from the left to the right. Close the door Move the upper bearing pivot to Left 818 20 68-00/0 View of the appliance Description of the ApplianceThese buttons are connected to the temperature display Buttons for Adjusting the TemperatureControl Panel Prior to Initial Start-Up Temperature DisplayInitial Start-Up Temperature AdjustmentCompressor will start and then run automatically Quick chill Fast Chill buttonSwitching the Appliance off Temperature warningOpen Door Warning Opening the Door Holiday ModeStorage Shelves Interior FittingsSalad Bin Quick Chill Shelf Bottle RackBottle and Can Holder Variable Inner Door Dismantling of the Bottle and Can HolderBottle Holder Proper Storage Food Storage Energy Saving AdviceHints and Tips Normal Operating SoundsDefrosting Maintenance and CleaningInternal Cleaning External CleaningChanging the carbon filter Replacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting EWhat to do if Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee ConditionsCalls may be recorded for training purposes Service & Spare PartsSubject to change without notice