Electrolux SANTO 4085 operating instructions Electrical Connection

Page 12

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1 WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow Earth				Green
Green and Yellow Earth				& Yellow
Blue		Neutral
Brown		Live
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings indentifying the			Blue	Brown
terminals in your plug, proceed
as follows:
1. The wire coloured green and
yellow must be connected to				Cord Clamp
the terminal marked with the				Cord Clamp
the terminal marked with the
letter "E“ or by the earth
symbol		or coloured green and yellow.
symbol		or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal "N“ or coloured black.

3.The wire coloured brown must be connected to the terminal marked "L“ or coloured red.

4.Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat.

1Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

12	818 18 12-00/2

Image 12

Contents Santo 4085-7 KG Dear customer Contents Service & Spare Parts Important Safety Instructions Prior to InstallationInstallation RefrigerantChild Safety Maintenance and CleaningDuring Use ServicingEnvironmental Information PackagingOld Appliances Appliance Transport Before Use Remove the transport fittings from the storage shelves Installation Installation LocationFitting the Door Handles Refrigerator/freezer needs air Appliance AlignmentElectrical Connection Reversing The Door Cover on the plinth from the left to the rightUnscrew the centre door bearing 818 18 12-00/2 Reversing The Door Appliance Description View of ApplianceFreezer tray with Cold Accumulation Block Control Panel Temperature setting buttons Temperature DisplaysPrior to Initial Start-Up Initial Start-Up Refrigerator Start-UpFreezer Compartment Start-Up Temperature Adjustment COOLMATIC/FROSTMATIC Switching the Appliance Off If the appliance is not to be used for an extended periodHoliday Mode Temperature Warning Control and Information SystemsOpen Door-Warning For the fridgeFunction Errors Opening the Freezer Compartment DoorFor the freezer Interior Accessories Storage ShelvesBottle rack Important Only store unopened bottles horizontallyVariable Inner Door Drawers and CompartmentsBottle Holder Vario drawer-setCorrect storage Freezing Frozen Storage Preparation of Ice CubesTips Defrosting Refrigerator is defrosted automaticallyFreezer Compartment Defrosting Pull out the water drain spout Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning Replace light bulbSymptom Solution Something not WorkingTechnical Terminology Refrigerant CircuitEvaporator Guarantee Conditions Regulations, Standards, GuidelinesCompressor CondenserEuropean Guarantee Service & Spare Parts Service & Spare PartsHelp us to help you Customer Care