Applies only to the temperature display for the refri- gerator
•When the FAST CHILL function is switched on (see also section: "Fast Chill/Fast Freeze"), "IC" is displayed in the temperature display. As long as the FAST CHILL function is switched on, no refrigerator tem- perature is indicated in the temperature display.
Applies only to the temperature display for the free- zer compartment
•If, for example, frozen goods have been partially or completely tha- wed due to a power failure, the temperature display alternately indi- cates:
–the freezer compartment temperature (ACTUAL temperature) and
–the highest temperature to which the frozen goods have warmed.
Prior to Initial Start-Up
1 Before connecting the appliance to the mains and putting it into ope- ration for the first time, leave the appliance to stand for 30 minutes if it was transported upright. After transport on its side, the appliance must be left to stand for 4 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.
0Please clean the appliance interior and all accessories prior to initial
0Remove the cold accumulation block from the freezer tray.
0Place the cold accumulation block into a compartment or drawer only after the optimal storage temperature of
0After 24 hours place the cold accumulation block at the front of the freezer tray.
0
20 | 818 14 |