Electrolux S92358-KA2 Mounting the handles, Unpacking, Remove the transport supports, Cleaning

Installation

Unpacking

Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling. For more information, contact your local council or the dealer.

Do not allow children to play with the packaging. The plastic film can cause suffocation.

Remove the transport supports

Remove the tape and the transport supports from

· the door sides · the shelves

Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed.

Cleaning

Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth.

Mounting the handles

1.Screw the top handle bracket to the handle rod.

2.Fit the bottom han dle bracket on the lower left-hand side of the door.

3.Fit the top handle bracket on the top left-hand side of the door and screw the handle rod to the bottom handle bracket.

Caution! Do not overtighten the screws (max. 2 Nm) as you may damage the door handles.

1	3
2
20	AEG/Electrolux 8184261-00/9