Electro-Voice SBA750 user manual Quick Start, Output levels

Page 5

1. Quick Start

Caution: Before switching on the power of the SbA750 always set the LEVEL control to its counterclockwise stop. A playing sound source could otherwise lead to extreme

output levels.

This Quick Start Manual outlines the set up and operation of a SbA750 used as add-on subwoofer together with a Powermixer (see configuration examples). The operation procedures are equivalent for other mixers.

1.Set up your Powermixer system as usual and connect a signal source to the power mixer (e.g. CD Player or microphone).

2.Place your SbA750 somewhere between your full-range cabinets.

3.Set the SbA750’s LEVEL control to its counterclockwise stop and connect the unit to a wall outlet using the supplied PowerCon mains cord.

4.Use a stereo phone plug cable to connect the Powermixer’s MONO OUT to the SbA750’s L/MONO INPUT.

5.Move the Mixer MONO OUT fader all the way down.

6.Be sure to switch on the Mixer first and then the SbA750.

Switching on the SbA750 last is recommended. Otherwise, unwanted power-on noise might occur. When switching off your equipment, please proceed in the opposite order, i.e. switch off the SbA750 first.

7.Set the SbA750’s LEVEL control to its center position (0dB) and start the playback of the desired signal audio source.

8.After adjusting the desired acoustic output level of the full-range cabinets using the Powermixer’s master fader, establish volume setting for the subwoofer using the MONO OUT fader.

Electro-Voice®￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Electro-Voice For US and Canada only Important Safety InstructionsImportant Service Instructions Electro-Voice Table of ContentsIntroduction Unpacking and Warranty Setup and ConnectionsOutput levels Quick StartInput L/Mono, Input R ControlsParallel Outputs L/R Mid-High Outputs L/RPower Switch Status IndicatorsAC Connector AC FuseLF-Cords CablingAdd-On Operation Setup Example aStereo 2-way Active Operation with Mono Subwoofer Setup Example BStereo 2-way Active Operation with Stereo Subwoofer Setup Example CStereo 2-way Active PA-System Setup Example DSxA Setup Example EPA-system with Active Components Dimensions SpecificationsBlock Diagram

SBA750 specifications

The Electro-Voice SBA750 is a powerful and versatile subwoofer, designed to deliver deep, impactful bass performance for a wide range of applications. Known for its high efficiency and robust build quality, the SBA750 is ideal for both mobile DJ setups and permanent installations in clubs, concert venues, and theaters.

One of the standout features of the SBA750 is its impressive output capabilities. With a maximum SPL (Sound Pressure Level) of 130 dB, this subwoofer can fill large spaces with rich bass without distortion. It is equipped with a high-quality 15-inch woofer that is specifically designed to handle high levels of power, ensuring that it can reproduce low frequencies with precision and authority.

The SBA750 utilizes a class D amplifier, which not only provides great power efficiency but also keeps the unit lightweight and easy to transport. This amplifier is capable of delivering 750 watts of continuous power, making it a robust choice for both portable and installed applications. The amplifier also includes built-in protection circuitry to prevent overheating and overloading, ensuring the longevity of the subwoofer.

Another key characteristic of the SBA750 is its advanced DSP (Digital Signal Processing) capabilities. This feature allows users to fine-tune the subwoofer’s performance to suit their specific environment and application needs. With adjustable EQ settings, users can easily tailor the sound profile to match the acoustics of the venue, whether it be a live concert or a DJ performance. The DSP also provides crossover control, allowing for seamless integration with full-range speakers.

The rugged cabinet design of the SBA750 is built to withstand the rigors of touring and live events. Constructed from durable plywood, the enclosure is finished with a rugged black paint that is resistant to scuffs and scratches. The front grille is made from strong metal to protect the driver while maintaining a sleek aesthetic.

In addition to its impressive technical specifications, the SBA750 features multiple input/output connectors, including XLR and ¼-inch jacks, ensuring compatibility with a wide range of sound systems and equipment. Its compact form factor also allows for flexible placement options, whether it be on the ground, in an array, or tightly packed in a truck for transport.

In summary, the Electro-Voice SBA750 subwoofer combines high power output, advanced DSP technology, and durable construction to deliver a reliable low-end solution for any sound application. Whether you’re a professional sound engineer or an aspiring DJ, the SBA750 is designed to meet the demands of modern audio environments. With its focus on performance and functionality, it remains a top choice for bass enthusiasts worldwide.
Top Page Image Contents