Installation Instructions

It is dangerous to alter the speciﬁ cations or attempt to modify this product in any way.

Technical Information
DIMENSIONS	HEIGHT OF CANOPY:		54 mm
	HEIGHT OF CHIMNEY:	(UPPER SECTION)	465 mm
		(LOWER SECTION)	740 mm
	WIDTH OF CANOPY :		598 mm
	DEPTH OF CANOPY:		520 mm
ELECTRICAL SUPPLY:	VOLTAGE:	220-240 V 50Hz
	POWER CONSUMPTION:		230W
	FAN MOTOR:		150W
	LAMPS : (2 x 40 W)		80W

Note: CE Marking certiﬁes that this appliance complies with the requirements laid down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent modiﬁcations and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualiﬁ ed electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance is ﬁ tted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, ﬁ tted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to ﬁ xed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.