Fitting the Wall Brackets, Wall marking

INSTALLING THE COOKER HOOD

Fitting the Wall Brackets

7.2.1

11 116 116

X 1÷2

12a

650 min.

Wall marking:

320

•Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed.

•Draw a horizontal line at 650 mm above the hob.

•Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line.

•Mark the wall at the centres of the holes in the bracket.

•Place bracket 7.2.1 on the wall as shown at X mm below the ﬁ rst bracket (X = height of the upper chimney section supplied), aligning the centre (notch) with the vertical line.

•Mark the wall at the centres of the holes in the bracket.

•Mark a reference point as indicated at 116 mm from the vertical reference line and 320 mm above the horizontal reference line.

•Repeat this operation on the other side.

•Drill ø 8 mm holes at all the centre points marked.

•Insert the wall plugs (not supplied) in the holes.

•Fix the lower bracket 7.2.1 using the two screws (not supplied).

•Fix the upper bracket 7.2.1 and the air outlet connection support 7.3 together using the two screws (not sup- plied).

•Insert the two screws 12a (not supplied) supplied in the hood body ﬁ xing holes, leaving a gap of 5-6 mm between the wall and the head of the screw.

Note: If the hood is to be installed onto a hollow construction or plaster or partition board wall then special ﬁxing screws will be required (not supplied).

CH 910 specifications

The Electrolux CH 910 is a high-performance vacuum cleaner designed to meet the demands of modern households. This model combines advanced technology with user-friendly features, making it an ideal choice for those seeking optimal cleaning solutions for various floor types and surfaces.

One of the standout features of the Electrolux CH 910 is its powerful suction capability. Equipped with a robust motor, it ensures that even the most stubborn dirt and debris are effectively captured. The vacuum cleaner is designed to operate efficiently on both hard floors and carpets, providing versatility for users. The adjustable suction power allows you to tailor the cleaning intensity depending on the surface being cleaned, ensuring thorough performance without damaging delicate materials.

This vacuum also features a lightweight and ergonomic design, making it easy to maneuver around the home. The CH 910 is cordless, providing the convenience of unhindered movement between rooms and allowing for effortless cleaning in spaces without accessible power outlets. The built-in rechargeable battery offers an impressive runtime, enabling users to clean larger areas on a single charge.

Additionally, the CH 910 comes with a range of specialized attachments to enhance its usability. These include a motorized brush for carpets, a crevice tool for tight spaces, and an upholstery nozzle for cleaning furniture. Each accessory is designed to optimize performance on different surfaces, ensuring that every corner of your home gets the attention it deserves.

Another key characteristic of this vacuum is its advanced filtration system. The CH 910 is equipped with a HEPA filter that traps allergens and fine particles, making it an excellent choice for allergy sufferers. This feature not only improves indoor air quality but also ensures that the environment remains clean and healthy.

In terms of maintenance, the dust container is easy to empty and clean, promoting a hassle-free experience for users. The design also includes a clear point of visibility for the dust level, eliminating guesswork when it comes to maintaining optimal performance.

In summary, the Electrolux CH 910 vacuum cleaner is a blend of power, efficiency, and convenience. With its strong suction capabilities, versatile attachments, lightweight design, and advanced filtration, it stands out as an excellent choice for achieving cleanliness in the modern home.