Electrolux CH 910 manual Fitting the Hood Body, 150, 12a 14.1

Page 15

INSTALLING THE COOKER HOOD

Fitting the Hood Body

Before starting to fi x the hood body, tighten the two screws Vr located on the top of the hood body.

Hook the hood body onto the two screws item 12a (not supplied).

Fully tighten the screws item 12a.

Using a screw driver and spirit level, adjust the screws item Vr until the hood body is level.

Extraction

The cooker hood is more effective when used in the extraction mode (ducted to the outside).

Venting kits may be purchased through your retailer or DIY store, and must be ducted to an outside vent of Ø125mm (5”) or Ø150mm (6”).

The ducting used must be manufactured from fi re retardent material conforming to the relevant British Standard or DIN 4102-B1.

When the cooker hood is ducted to the outside the charcoal fi lter must be removed.

Recirculation

The cooker hood is supplied specifi ed for use in the recirculation mode, with the charcoal fi lter fi tted.

In the recirculation mode contaminated air is passed through the charcoal fi lter to be purifi ed and recirculated into the kitchen through the grille outlets on either side of the chimney.

To assemble the recirculation duct, place the recirculation outlet connection item 15 into the support item 7.3.

Insert the extension ducts item 14.1 into either side of the recirculation outlet item 15 ensuring the connections are vertically and horizontally aligned with the outlets in the chimney.

Connect the recirculation oulet item 15 to the outlet on top of the hood body using either a piece of Ø125mm or Ø150mm fl exible or rigid pipe.

Rigid pipe is strongly recommended and should be used where possible as this will ensure the best performance while lowering noise.

Vr

12a

14.1

15

ø150

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instruction Book Page For the User For the Installer Maintenance and CleaningOperating Instructions Maintenance and Service Important Safety InformationInstallation Child SafetyYour Appliance Operating Instructions Basic functionsDual Function Maintenance and Cleaning To Remove/Replace the Charcoal Filters Enabling the alarm signalAlarm signal reset Charcoal FiltersCooker hood will not start Service and Spare PartsSymptom Solution Something not WorkingThis Guarantee does not cover Guarantee ConditionsElectrical Connection Installation InstructionsElectrical Connections Electrical RequirementsInstalling the Cooker Hood Installation RequirementsUnpacking Clearance Height 30 1/2 when installed above a slot-in gas cookerWall marking Fitting the Wall BracketsFitting the Hood Body 15012a 14.1 Ducting Electrical Connection and Working Test150 Upper Chimney Fitting the Chimney StackPage Page Berkshire SL1 1DZ Electrolux plc

CH 910 specifications

The Electrolux CH 910 is a high-performance vacuum cleaner designed to meet the demands of modern households. This model combines advanced technology with user-friendly features, making it an ideal choice for those seeking optimal cleaning solutions for various floor types and surfaces.

One of the standout features of the Electrolux CH 910 is its powerful suction capability. Equipped with a robust motor, it ensures that even the most stubborn dirt and debris are effectively captured. The vacuum cleaner is designed to operate efficiently on both hard floors and carpets, providing versatility for users. The adjustable suction power allows you to tailor the cleaning intensity depending on the surface being cleaned, ensuring thorough performance without damaging delicate materials.

This vacuum also features a lightweight and ergonomic design, making it easy to maneuver around the home. The CH 910 is cordless, providing the convenience of unhindered movement between rooms and allowing for effortless cleaning in spaces without accessible power outlets. The built-in rechargeable battery offers an impressive runtime, enabling users to clean larger areas on a single charge.

Additionally, the CH 910 comes with a range of specialized attachments to enhance its usability. These include a motorized brush for carpets, a crevice tool for tight spaces, and an upholstery nozzle for cleaning furniture. Each accessory is designed to optimize performance on different surfaces, ensuring that every corner of your home gets the attention it deserves.

Another key characteristic of this vacuum is its advanced filtration system. The CH 910 is equipped with a HEPA filter that traps allergens and fine particles, making it an excellent choice for allergy sufferers. This feature not only improves indoor air quality but also ensures that the environment remains clean and healthy.

In terms of maintenance, the dust container is easy to empty and clean, promoting a hassle-free experience for users. The design also includes a clear point of visibility for the dust level, eliminating guesswork when it comes to maintaining optimal performance.

In summary, the Electrolux CH 910 vacuum cleaner is a blend of power, efficiency, and convenience. With its strong suction capabilities, versatile attachments, lightweight design, and advanced filtration, it stands out as an excellent choice for achieving cleanliness in the modern home.
Top Page Image Contents