Electrolux 8490 D Installation, Unpacking, Position, Electrical connection

Page 12

Installation

Unpacking

Check that the cooker hood is not damaged. Transportation damages should immediately be reported to the transport company. Damages, faults and missing parts should immediately be reported to the retailer.

Dispose carefully of the packaging material so that it is out of the way of small children.

Position

The cooker hood should be mounted freely hanging on the wall. The cooker hood must be at least 50 cm above electric hobs or electric ranges, or at least 65 cm above gas burners or gas ranges.

The cooker hood cannot be connected to flues of other appliances that run on energy sources other than electricity. Please, keep to the provisions of official directives regarding fume discharge.

Electrical connection

The electric outlet should be placed inside the chimney.The hood has a power cable, 100 cm, with an earth connection and the rated voltage is 220 - 240 V.

Connect the hood to the mains supply via a double pole switch which has 3 mm minimum clearance between the contacts 220-240 V.

The following is valid in the United Kingdom only:

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-the wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol ( ), or coloured green or green and yellow;

-the wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black, -

-the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

12

Image 12
Contents 8490 D Contents Accessories Description of the cooker hoodUse of cooker hood DisposalUsing the cooker hood Function when Sensor is not displayedControl panel Function at displayed SensorDelayed switch off Filter saturation indicatorCorrect ventilation Important to knowMaintenance and cleaning Cleaning the hoodCleaning the grease filters Changing and cleaning the carbon filterChanging the light Symptom Solution What to do if Service and spare parts Customer CareGuarantee conditions Guarantee ConditionsTechnical data Extra accessoriesModel 8490 D Installation UnpackingPosition Electrical connectionMounting the cooker hood Fig Fitting for ducting SFitting for recirculation K Mounting the chimneyPage Exhaust tube AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG