Bunn JDF-4S QUICK SETUP GUIDE - JDF-2S and JDF-4S (JDF-2S shown)

1. Install door cover by ﬁrst plugging the

door harness connector into the machine

harness connector located at the bottom

of the machine door. 2. Install door cover. 3. Secure the door cover using 5 screws

provided.

4. Place refrigeration switch in the OFF po-

sition.

5. Connect water supply to machine. (See

Plumbing Requirements)

6. Connect power supply to machine. (See

Electrical Requirements)

7. Install bath tank ﬁll tube over a nozzle as

shown.(See Initial Fill) 8. Place the Dispense Lockout switch

in the OFF position.

9. Hold the dispense switch until water be-

gins to ﬂow into the tank (approx. 10 sec-

onds). When tank is full, water will begin

pour out of the overﬂow tube, Press the

dispense button to stop the ﬂow of water.

10. Place the refrigeration switch in the ON

position.

11. Insert juice containers as shown.

12. Proceed to page 7 in the Operating and

Installation manual for calibration instruc-

tions and charts.

QUICK SETUP GUIDE - JDF-2S and JDF-4S (JDF-2S shown)

P3577

P3578 P3579

P3587-1 P3580-1 P3588

P3591

P3590-1

P3582 P3589

P3612

39992 042007