Warning
•Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.
•The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.
Changing the light bulb
•Disconnect the cooker hood from the mains supply.
•Remove the lamp cover, use a screw driver as a lever. Fig. 6.
•Replace the old bulb with a new one of the same type.
•Refit the lamp cover.
•If the light does not come on, make sure the bulb has been inserted in correctly before contacting your local AEG Service Force Centre.
Fig. 6
69