Description of the Appliance, Extraction

Description of the Appliance

•The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter.

•You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre).

•Only for CHDI 8820: The cooker hood is supplied ready for use as a recirculation hood and may be used for extraction by

removing the charcoal filter which has been fitted inside the cooker hood.

• In this version fumes are extracted to the	A
• In this version fumes are extracted to the
outside via a hose connected to the coupling
ring A. Fig. 1.
• In order to obtain the best performance the
hose should have a diameter equal to the outlet
hole.

•Should there already be a pipe with a diameter of 125mm that ducts to the outside through the

	wall or roof, it is possible to use the 150/125	Fig. 1
	mm reduction flange provided. In this case the	Fig. 1
	mm reduction flange provided. In this case the
	hood will be slightly noisier.

•The air is filtered through a charcoal filter and returned to the kitchen.

•You will need an original AEG charcoal filter for the filtering function. (See Special Accessories).

•Fix the deflector using 4 screws Ø 3.5x6.5 mm. Fig. 2.

Fig. 2