G
H
Fig. 13
•Draw a line with a pencil on the middle of the internal side of the furnituture door. Fig. 14.
= | = |
|
L
Fig. 14
•Fit the visor upon the internal side of the furniture door so that the line previously marked on it, is visible through the two triangles holes located on the mid upper and lower side of the visor, having care to respect the distance from the visor to the higher edge of the furniture door as for the reason mentioned above in Fig. 12.
•Fasten the visor to the furniture door through the 8 screws L 4,5x13 mm supplied. Fig. 14.
•Replace the complete visor assembly into the extractor hood, first inserting it on its upper, then on its lower guides.
•Turn the rear unlocking knobs H so to avoid the visor take off. Fig. 13.
•Refit the grease filters.
71