Electrolux 36 manual Using the Touch Control, Locations of the Surface Radiant Elements

10Setting Surface Controls

LOCATIONS OF THE SURFACE RADIANT ELEMENTS

Your cooktop is equipped with radiant surface burners with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases.

The radiant surface elements are located on the 30” cooktop as follows:

-2 single radiant elements located at the right and left rear positions;

- 1 dual radiant element located at the right front position;

Fig. 1 - 30” cooktop - 1 triple radiant element located at the left front position;

The radiant surface elements are located on the 36” cooktop as follows:

-2 single radiant elements located at the right and left rear positions;

-2 dual radiant elements located at the right and center front positions;

-1 triple radiant element located at the left front position;

Fig. 2 - 36” cooktop

USING THE TOUCH CONTROL

The recommended way to use the touch pads on the cooktop is shown in Fig. 3. Be sure that your finger is placed in the center of the touch pad as shown. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made.

Lightly contact the pad with the flat part of your entire fingertip. Do not just use the narrow end of your fingertip.

Fig. 3