Radio Description: SSE 5000 UHF Range 2 (450–488 MHz) Model Chart

1-3

 

 

1.4SSE 5000 UHF Range 2 (450–488 MHz) Model Chart

 

MODEL NUMBER

DESCRIPTION

 

 

H10SDD9PW6AN

UHF Range 2 (450–488 MHz), 2–5 Watts, SSE 5000

 

 

ITEM NUMBER

DESCRIPTION

XAntenna, UHF (Refer to Section A.1: “Antennas” on page A-1)

X

Battery (Refer to Section A.2: “Batteries” on page A-1)

X

NUE7337_

Board, Transceiver, UHF Range 2 (450–488 MHz)

X

NCN6186_

Board, VOCON *

X

Cable, Programming (Refer to Section A.8: “Programming Cables” on page A-2)

X

Case, Carrying (Refer to Section A.3: “Carrying Accessories” on page A-1)

X

Charger (Refer to Section A.4: “Chargers and Charger Accessories” on page A-1)

X

NTN7061_

Cover, Accessory Connector

X

NNTN4709_

Kit, Belt Clip

X

NNTN4825_

Kit, Chassis, Back

X

NNTN4826_

Kit, Chassis, Front

X

8485687E01

Kit, Control Flex

X

NNTN4468_

Kit, Hardware

X

NNTN4467_

Kit, Housing

X

8485791E01

Kit, Speaker Mic Flex

X

Mic Accessories (Refer to Section A.7: “Microphones and Microphone Accessories” on page A-2)

X

NNTN4006_

Module, Encryption, DES, DES-XL, DES-PFB

X

Surveillance Accessories (Refer to Section A.9: “Surveillance Accessories” on page A-2)

Notes:

X= Item Included

*= When ordering a VOCON board, you will be asked to provide the radio's model number, FLASHcode, host code, and DSP code. You can find this information as follows:

For the radio model number and FLASHcode, place the radio in test mode (see Section 4.2: “Radio Test Mode” on page 4-2) and view the scrolling displays.

For the host code and DSP code, read the radio using the programming cable (RKN4121_ or RKN4122_) and view the information in the CPS.

6881094C12-A

November 11, 2004

Page 19
Image 19
Motorola SSETM 5000 service manual SSE 5000 UHF Range 2 450-488 MHz Model Chart, Item Number Description