Motorola SSETM 5000 service manual Service Aids, Motorola, Part Description Application, Number

Test Equipment and Service Aids: Service Aids 3-3

3.3Service Aids

Refer to Table 3-2for a listing and description of the service aids designed specifically for servicing this family of radios. These kits and/or parts are available from the Radio Products and Services Division offices listed in “Appendix B: Replacement Parts Ordering”. While all of these items are available from Motorola, most are standard shop equipment items, and any equivalent item capable of the same performance may be substituted for the item listed.

		Table 3-2. Service Aids
Motorola			Service
Part	Description	Application
			Level
Number
0180386A82	Anti-static grounding	Used during all radio assembly and disassembly procedures	1, 2, 3
	kit
RKN4121_	USB Cable Kit	Connects radio to RLN-4460 Portable Test Set for radio	1
		performance checks, and to Universal Serial Bus (USB) port on
		personal computer for CPS programming and tuner
		alignments.
RKN4122_	RS232 Cable Kit	Connects radio to RLN-4460 Portable Test Set for radio	1
		performance checks, and to serial port on personal computer
		for CPS programming and tuner alignments.
RLN4460_	Portable Test Set	Used for radio performance checks and alignments. Connects	1
		to radio’s universal connector and allows remote switching and
		signal injection/outputs for test equipment measurements.
RTL4224_	Battery Eliminator	Used in place of battery to connect radio to an external power	1
		supply.
RVN4181_	Customer	CPS allows customer-specific programming of modes and	1
	Programming Software	features. Tuner software required to perform alignment of radio
	(CPS) and Tuner	parameters.
	Software
TKN8506_	Saber Keyload Cable	Connects radio to keyloader for loading encryption keys.	1
5880384G68	SMA-BNC Adapter	Adapts radio’s female SMA antenna port to BNC cabling of test	1
		equipment.
RSX4043_	ROTO-TORQ Tool	Adjustable torque screwdriver	2
6680321B79	Phillips Head Star Bit	Bit used for attaching/detaching power contact screws.	2
6680370B88	Channel and Volume	Bit used for attaching/detaching volume control and channel	2
	Switch Spanner Nut Bit	select switch spanner nuts.
6680371B34	Antenna Spanner Nut	Bit used for attaching/detaching antenna spanner nuts.	2
	Bit
6680387A74	T-10 Torx Bit	Bit used for attaching/detaching radio bolts.	2
8180384N70	Housing Eliminator	Special fixture that allows radio’s internal board to be mounted	2
		externally. Provides easy access to electronic circuits, required
		for board-level troubleshooting.
R1453	Digital-readout solder	Digitally controlled soldering iron	3
	station

6881094C12-A November 11, 2004