Motorola SSETM 5000 Disassembly/Reassembly Procedures for Accessories, Antenna, Battery

W A R N I N G

7-6 Disassembly/Reassembly Procedures: Disassembly/Reassembly Procedures for Accessories

7.4Disassembly/Reassembly Procedures for Accessories

7.4.1Antenna

This section explains how to attach and remove the antenna.

7.4.1.1 Attach the Antenna

With the radio turned off, twist the antenna clockwise onto the connector on the top of the radio.

7	5
	1

51

3

Figure 7-2. Attaching/Removing the Antenna

NOTE: If you are using a public safety mic (PSM), the antenna for the PSM must be attached to the PSM. Refer to the accessory guide included with the PSM.

7.4.1.2 Remove the Antenna

With the radio turned off, twist the antenna counter-clockwise to remove it from the radio.

7.4.2Battery

This section explains how to properly attach and remove the battery.

To avoid a possible explosion:

!• DO NOT charge, remove, or attach the battery in an area labeled “hazardous atmosphere.”

• DO NOT discard batteries in a fire.

November 11, 2004 6881094C12-A