What to do if, Symptom Solution | Electrolux 2460 D specification

What to do if

If your appliance fails to work properly please carry out the following checks.

Symptom	Solution

The cooker hood will not start...	Check that:
	The hood is connected to the
	electricity supply.
	Check that the fan speed control is
	set to 1, 2 or 3.

The cooker hood is not working	Check that:
effectively..	The fan speed is set high enough
.	for the task.
	The grease filters are clean.
	The kitchen is adequately vented to
	allow the entry of fresh air.
	If set up for recirculation, check that
	the charcoal filter is still effective.
	If set up for extraction, check that
	the ducting and outlets are not
	blocked.

The cooker hood has switched off	The safety cut-out device has been
during operation...	tripped.
	Turn off the hob and then wait for the
	device to reset.
	If the hood has been installed below
	the heights indicated in the
	installation instructions the motor
	will cut-out frequently which will
	damage the hood.

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.