Electrolux 44450 manual Installation instructions, Proceed as follows

Page 40

152963010en per uk.qxp 25/03/2004 15.31 Pagina 40

Installation instructions

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

570÷

600

820

450

IN04

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the Service Force Engineer.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

40

Image 40

Contents Favorit Following symbols are used in the text Dear customerContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Control panel Operating instructions Prior to using for the first time Setting the water softenerSetting manually Setting electronicallyExamples Filling with salt To fillFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Dishwasher must be switched off Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Glazed patterns may fade if machine washed frequentlyCutlery basket Upper basket Adjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsGeneral advice Use of 3 in 1 combi detergentsWashing programmes Type DegreeSetting and starting the programme Starting a washing programmeTo interrupt or cancel a washing programme in progress To cancel a washing programme in progressEnd of the washing programme Cancelling the delay start in progressUnloading the dishwasher 1 function This function can be selected together with all programmesMaintenance and cleaning Cleaning the filtersMA40 Prolonged periods of non-operation Frost precautionsMoving the machine Flashing fault code appears What to do, whenThere are problems when operating the dishwasher Dishes are not clean Wash results are not satisfactoryCustomer Care Help us to help you This guarantee does not cover Standard Guarantee Conditions Exclusions European Guarantee Technical specifications Electrical connectionInstallation instructions Proceed as followsWater supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Electrical connection Brown LiveHints for test centres Arrangement cutlery basket Cup racks position a152963010en per uk.qxp 25/03/2004 15.31 Pagina 152963010en per uk.qxp 25/03/2004 15.31 Pagina Postfach 90327 Nürnberg Copyright by AEG