152963010en per uk.qxp 25/03/2004 15.31 Pagina 42
Installation instructions
Water inlet hose with safety valve
After connecting the
Please take care when installing the water inlet hose:
-The electrical cable for the safety valve is in the
-If water inlet hose or the safety valve is damaged, remove the mains plug immediately.
-A water inlet hose with safety valve must only be replaced by a Service Force Engineer.
-Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.
-The water inlet hose must hang vertically down from the water supply tap.
42