Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper basket outwards and slide the basket out.
2.Refit the basket in the higher position and replace the stops (A) in their original position.
Attention!
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the cup racks.
A |
RC01 |
After loading your machine always close the door, as an open door can be a hazard.
15