20
Operating instructions
1. Check the filters
Ensure they are clean and properly positioned (see "Maintenance and cleaning").
2.Check that there is rinse aid and salt
3.Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
4.Ensure that the spray arms can rotate freely.
5.Measure out detergent
Add the detergent into the dispenser according to the dosage quantity given in the "Washing programmes" chart.
Close the detergent dispenser lid.
6.Close the dishwasher door
7.Set the programme
Turn programme selector dial clockwise until the programme marker on the knob corresponds with the programme you wish to select on the control panel.
Select the temperature according to the instructions in the "Washing programmes" chart (see "Required push buttons").
8. Start the programme
Open the water tap.
Depress the ON/OFF push button, the ON/OFF indicator light will come on and the machine will start.