Electrolux EHE 688 B, EHE 688W manual Electrical connections, Supply Cable Specifications, Pvc/Pvc

Page 13

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied without supply cord. A 3 core flexible supply cord must be fitted, in accordance with the specification given in the relevant tables.

Φ1) Remove the mains terminal cover plate from the underside of the hob, to expose the mains terminal block.

2)Loosen the two cable clamp screws and lift the top section of the clamp enough to allow the cable to be passed through.

3)Connect the red (live) wire to the terminal which is marked with the number 1.

4)Connect the black (neutral) wire to the terminal which is marked with the number 4.

5)After fitting a green or yellow/green sleeve over the bare copper wire (earth wire), connect the exposed end to the terminal which is marked with the earth symbol or with the number 5.

NOTE:

The earth wire should be about 2 cm. longer than the live and neutral wires.

6)Secure the cable by means of the clamp screws and refit the terminal block cover.

The hob should be conncted to a double pole switch with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. The switch should be sited within 2m of the hob and be easily accessible upon completion of the installation.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

Supply Cable Specifications

For Uk use only

Connection

Min. size

Cable / flex

Fuse

via

Cable/flex

type

 

 

 

 

 

• Cooker

6 mm2

PVC/PVC

30 A

Control

 

twin and

 

Circuit

 

earth

 

 

 

 

 

For Europe use only

Min. size Cable/flex

Cable / flex type

Fuse

 

 

 

2.5 mm2

H05 RR-F

30 A

 

 

 

FO0488

13

Image 13
Contents Instruction Booklet Important Safety Information Description of the Hob ContentsHints and Tips OperationElectric Hotplates Electric Hotplates Control LightHob Top Maintenance and CleaningHotplates Symptom Solution Service and Spare PartsSomething Not Working? Customer CareElectrolux Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsScotland Channel IslandsNorthern Ireland WalesLondon & East Anglia MidlandsSouth East South WestImportant safety requirements Instructions for the InstallerEngineers technical data Heating elements RatingsBuilding InstallationFitting the Hob into the worktop Building over a kitchen unit with doorElectrical connections Supply Cable SpecificationsThis HOB Must be Earthed PVC/PVCWiring diagram Page Customer Care

EHE 688W, EHE 688 B specifications

The Electrolux EHE 688 B and EHE 688 W are top-of-the-line electric hobs designed for modern kitchens, offering both functionality and style. These models cater to cooking enthusiasts who demand precision and flexibility in their culinary endeavors.

One of the standout features of the EHE 688 series is its touch control panel, which adds a sleek, contemporary look and allows for easy operation. Users can effortlessly adjust cooking temperatures and settings with just a fingertip, enhancing the cooking experience. The hob's precise heat control enables exact temperature settings, ensuring that every meal is cooked to perfection.

Both models feature four induction cooking zones, providing rapid heating and efficient energy consumption. Induction technology works by generating heat directly in the cookware rather than on the cooking surface, resulting in faster cooking times and reduced energy use. This also means the hob remains cooler to the touch, enhancing safety in the kitchen.

The EHE 688 series includes a variety of cooking functions designed to simplify food preparation. These functions include a booster setting that allows for quick boiling and a keep warm setting, ensuring that dishes maintain their temperature until served. Additionally, the hob's flexible cooking zones allow for the use of larger pots and pans, accommodating various meal types and sizes.

Safety is paramount in these models, featuring built-in functions such as the residual heat indicator that warns users when the surface is still hot, and an automatic shut-off feature that activates when a heating zone is left on unattended. The child lock function adds an extra layer of safety, preventing accidental activation by little hands.

The Electrolux EHE 688 B comes in a sophisticated black finish, while the EHE 688 W is offered in an elegant white, allowing homeowners to choose a style that best fits their kitchen décor. Both models are designed with easy cleaning in mind, as the smooth glass surface can be wiped down quickly after use.

In conclusion, the Electrolux EHE 688 B and EHE 688 W hobs combine advanced technology with user-friendly features. Their induction heating, precise controls, and safety measures make them an excellent choice for anyone looking to elevate their cooking experience while enjoying the benefits of modern kitchen technology.