Electrolux U20412 manual Ignition System / Gas Ignition

Page 14

Ignition System / Gas Ignition

Ignitor does not spark

Check gas supply at burner

Check plug top fuse and replace if necessary

Check polarity and earth continuity of supply point

Check earth continuity of appliance

Check continuity from 'N' on the mains connector block and "O" on the ignitor unit

Check continuity from 'L' on the mains connector block and the taps ignition switches

Check continuity from the tip of each electrode to the terminals 1 to 4 on the ignitor unit

Check for breaks in the insulation

of the HT leads

Light burner manually

Check by pass simmer adjusted

Check position of the electrode

Check fitting of burners



Check continuity from ignition					Change the taps
switches connector to ignitor unit					ignition switches

Change the ignitor unit

Image 14

Contents Instruction Booklet Important Safety Information Contents Description of the HobHob Top Maintenance and CleaningOperation Pan SupportsSomething Not Working? Service and Spare PartsSymptom Solution ElectroluxEuropean Guarantee Guarantee ConditionsElectrolux Standard Guarantee Conditions ExclusionsNorthern Ireland Channel IslandsScotland WalesSouth East MidlandsLondon & East Anglia South WestInstructions for the Installer Engineers technical dataWhen the HOB is First Installed Important safety requirementsInstallation LocationCut Out Size BuildingGas Connection Building over a cupboard or drawerPermanent Connection Electrical connectionsFitting the Hob into the worktop This HOB Must be EarthedPreliminary Electrical Systems Wiring DiagramFault Finding CheckIgnition System / Gas Ignition Conversion from Natural Gas to To Adjust the GAS RateCommissioning Grafihe MDM Forlì