Electrolux SIG 233 manual Electrical connections, Permanent Connection

Page 19

Electrical connections

Any electrical work required to install this cooker should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS COOKER MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This cooker is designed to be connected to a 230-240V AC 50Hz electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the cooker rating plate.The rating plate is located on the oven frame.

The cooker is supplied with a 3 core flexible supply cord incorporating a 13amp plug fitted. In the event of having to change the fuse, a 13amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

-Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbol or coloured green and yellow.

-Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

-Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

NOTE: The earth wire should be about 2 cm longer than the live and neutral wires.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safety.

Before connecting check that:

•The plug used for connection is easily accessible when the appliance is installed.

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the cooker and the electricity supply (mains), with a minimum gap of 3mm, between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the cooker supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C .

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Csig 231 SIG Page Contents During Use Important Safety InformationChild Safety ServiceHob Control panel Model CsigBefore the First Use of the Cooker USE of ApplianceGas Mark IgnitionGrill burner ignition Turning off the oven burnerOven light GrillingGrilling meat BrowningTurning off the burners Or Power CutHob Burners Ignition of the burnersTo replace the drawer follow the same procedure in reverse Accessories delivered with the applianceRemovable drawer Cookware Condensation and steamMaintenance and Cleaning Burners Oven Bulb ReplacementTo replace the faulty bulb HobSomething not Working Symptoms SolutionsCustomer Care Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeInstructions for the Installer Gas connections Advice for SafetyConnection to gas supply Permanent Connection Electrical connectionsPositioning InstallationRight Hand Connection from front GAS ConnectionsLevelling Left Hand Connection from frontPage Conversion of GAS Replace the nozzles of the hob burners Adjustment of minimum level for the hob BurnersHob burners Grill burner Adjustment of minimum levelReplace the nozzles of the oven burners Oven burnerPage Page CSIG231 Electrolux plc

SIG 233 specifications

The Electrolux SIG 233 is a standout appliance in the realm of kitchen equipment, representing a blend of innovative technology and user-friendly design. This built-in gas cooktop delivers exceptional cooking performance while prioritizing efficiency and convenience.

One of the main features of the SIG 233 is its reliable gas burner system, designed for precision cooking. It boasts multiple burners, including a powerful wok burner which provides high heat output for professional-style stir-frying and rapid boiling. The varying burner sizes allow cooks to use the right flame for different pots and pans, ensuring optimal cooking results every time.

The SIG 233 is equipped with Electrolux’s advanced flame failure safety system, which automatically shuts off the gas supply if the flame goes out. This feature provides peace of mind, making it a safe choice for busy kitchens, especially in households with children. The controls are intuitive and easy to operate, allowing users to adjust heat levels effortlessly and accurately.

An important characteristic of the SIG 233 is its sleek aesthetic design that seamlessly integrates into modern kitchen layouts. The surface is made from durable stainless steel, which is not only visually appealing but also resistant to stains and easy to clean. The cooktop's minimalist design features also complement various kitchen styles, making it an attractive addition to any culinary space.

Another technological highlight of the SIG 233 is the quick start ignition system, allowing for rapid burner ignition without the need for matches or lighters. This feature not only saves time but also enhances the overall cooking experience.

For those who prioritize energy efficiency, the SIG 233 is designed to optimize gas consumption, ensuring that heat is directed precisely where it's needed. This efficient use of gas not only helps in reducing energy bills but also contributes to a more sustainable cooking approach.

Overall, the Electrolux SIG 233 gas cooktop is an exemplary choice for anyone looking to enhance their cooking capabilities. With its powerful burners, safety features, and elegant design, it embodies the qualities that discerning home cooks seek in a modern kitchen appliance, promising both functionality and style.
Top Page Image Contents