Electrolux SIG 332 Connecting to GAS, Fitting the Battery, Pressure Testing, Checking the Grill

Page 43

4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO RESET VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

Check for gas soundness after connecting the gas supply. The gas bayonet connector must be fitted in the shaded area indicated in Fig. 4. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

Fig.4

All dimensions in mm

650

400

5. FITTING THE BATTERY

1.The battery is located on the left hand side of the front plinth.

2.To gain access to the battery, open the main oven door and

lift up the battery holder lid.

3. Fit the new battery ensuring (+) terminal is next to the (+)Fig.5 sign on the battery. See Fig.5.

4.Close the lid of the battery holder

6. PRESSURE TESTING

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.Gas The pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap full on and pressing the ignition button on the fascia panel. As soon as the burner is lit the button can be released.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SIG Introduction For your safetyContents Hotplate Lighting the applianceGrill Grill/second ovenSecond oven To turn off any burner Main ovenHeat control Prior to using the grillGrill control has two heat settings GrillPositioning food on the grid Cooking positionsGeneral PreheatingGrill pan is supplied with a removable handle Grill pan and handleBurner sizes HotplatePut pans on the centre of the burners Helpful hints Minutes OvensHeat zones Oven shelvesOven. This will not affect the cooking performance Condensation RoastingOven cooking chart Main oven Large Mins Individual Cakes Christmas cake Hours Mins. per ½kg 1lb and 25 minsMins Rolls and buns Fruit pie shortcrust MinsMince pies flan pastry Mins Baking trayBase Well Done Oven cooking chart Second ovenBase Medium Lamb Shelf on MediumOn baking tray Individual Mins Cakes Christmas cake ShelfBaked custard Mins Food preparation-slow cooking Slow cookingAdd towards the end of the cooking to prevent curdling Do not cook casseroles over 2.7kg 6lbCover food with a tight fitting lid or tin foil Thaw thoroughly before cookingCareandcleaningS I G 3 3 Crown to body Do not try to force the crown on to the body When replacing hotplate burner partsGrill,oven furniture and top oven Splashing Boil overOven roof This will help to reduce fatMain Oven Cleaning cycle To remove the outer glass Cleaning between the outer and inner door glassMake sure that a stability bracket is fitted Cleaning The Door GlassInstalling the appliance LocationPositioning Appliance dimensionsHeight to hotplate 898mm-920mm Width 498mm Depth Battery General information For your safetyMoving your appliance For your safety Check What is wrong and why?G 3 3 Problem 7 0 5 9 2 9 9 2 Service and spare partsCustomer Care Department Installation Instructions Grill DimensionsConnections IgnitionGAS Category Countries of Destination Important Safety RequirementsProvision for Ventilation Location of Appliance Levelling the Appliance Parts RequiredFitting the Stability Bracket Checking the Grill Connecting to GASFitting the Battery Pressure TestingChecking the Second Oven Checking the HotplateChecking LID CUT-OFF Device Checking the Main OvenT E S SIG 332 Contents Check List SL1 1DZ Telephone 0870 5 Part Number311638001 55 77 High Street

SIG 332 specifications

The Electrolux SIG 332 is a standout appliance in the realm of home washing machines, designed to combine efficiency, convenience, and advanced technology. This washing machine, known for its sleek design and user-friendly interface, caters to a wide range of laundry needs, making it an ideal choice for families and individuals alike.

One of the main features of the Electrolux SIG 332 is its impressive capacity. With a drum size that accommodates large loads, this washer allows users to complete laundry in fewer cycles, saving both time and energy. The machine is designed with a balanced wash system that ensures even cleaning, minimizing wear on fabrics while maintaining optimal wash performance.

The Electrolux SIG 332 is equipped with various washing programs tailored to different fabric types and soil levels. From delicate items to heavily soiled work clothes, users can select from multiple cycles, including quick wash options that deliver thorough cleaning in under an hour. The intuitive control panel makes selecting the right program effortless, featuring a digital display and easy navigation.

Advanced technology is at the heart of the Electrolux SIG 332. It features a unique sensor wash system that automatically adjusts water levels and wash time based on the load size, ensuring efficiency and resource conservation. This smart technology not only saves on water bills but also contributes to a more sustainable laundry routine.

In terms of energy efficiency, the SIG 332 boasts an excellent energy rating, allowing users to wash their laundry with minimal impact on utility costs. The machine is designed with noise-reduction technology, ensuring quiet operation even during high-speed spins. This feature is particularly beneficial for households where laundry is done during nighttime or in proximity to living areas.

Safety is another priority with the Electrolux SIG 332. It is designed with a child lock feature, preventing any accidental interruptions during the wash cycle. The built-in leak detection system provides peace of mind by preventing potential water damage.

In summary, the Electrolux SIG 332 is a robust washing machine that combines cutting-edge technology with thoughtful design. With its large capacity, versatile wash programs, energy efficiency, and built-in safety features, this appliance is perfect for modern households looking to streamline their laundry experience while ensuring quality care for their garments.
Top Page Image Contents