Electrolux EK 5731 manual Fitting the Stability Bracket Not supplied, Connecting to Gas

Page 20

 

 

300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

250 mm.

 

 

PLAN VIEW OF THE COOKER

SIDE VIEW

FO 2434

OF THE COOKER

Fig. 2

 

Dimensions are given in millimeters

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted.

(See safety Requirements: Page 20).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 250mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/ 8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

20

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

 

600

450

 

130

 

FO 2435

Fig. 3

Dimensions are given in millimeters

Image 20
Contents Instruction Booklet Important Safety Information Contents Description of the Cooker Oven Cavity Accessories Control PanelOperation Hob burnersBefore the First Use of the Oven Oven Function Control KnobUsing the Oven Condensation and steamCookware Effects of dishes on cooking resultsUsing the Conventional Oven How to Use Conventional OvenTop oven element only Bottom oven element onlyCooking Chart Meat TemperaturesHow to Use the Grill GrillingMaintenance and Cleaning Hob TopPan Supports BurnersLid cleaning EK 5731 W/GR only Cleaning the OvenOven lamp replacement Symptom Solution Something Not WorkingService and Spare Parts Customer CareElectrolux Service Force Midlands Instructions for the Installer Important Safety RequirementsInstallation PositioningtheApplianceFig.1Connecting to Gas Fitting the Stability Bracket Not suppliedElectrical connections This Cooker Must be EarthedCommissioning To Adjust the GAS Rate Conversion from Natural to LPG GasElectrolux Group. The world’s No.1 choice

EK 5731 specifications

The Electrolux EK 5731 is a high-performance kitchen appliance designed to enhance your cooking experience with its innovative features and reliable technologies. As one of Electrolux's flagship models, the EK 5731 stands out for its versatility, user-friendliness, and energy efficiency.

One of the main features of the EK 5731 is its powerful oven, which offers a generous capacity, allowing you to cook multiple dishes at once. With a range of cooking modes, including conventional baking, grilling, and fan-assisted cooking, this oven ensures even heat distribution and optimal cooking results. The inclusion of a digital display and intuitive controls makes it easy to select the desired cooking settings and track your food’s progress.

Another notable technology utilized in the Electrolux EK 5731 is its advanced heating system. This model employs a combination of both conventional and convection heat, providing flexibility for various cooking styles. The convection feature circulates hot air within the oven, leading to faster cooking times and better browning, making it ideal for baking fluffy cakes and roasting meats to perfection.

In terms of energy efficiency, the EK 5731 is designed with sustainability in mind. It meets high energy efficiency ratings, meaning you can enjoy great performance without significantly increasing your energy bills. The energy-saving mode allows users to continue their cooking while minimizing power consumption.

The EK 5731 also boasts several safety features, including a triple-glazed oven door that helps maintain the internal temperature while keeping the exterior cool to the touch. This is a crucial element for households with children or pets.

Cleaning is made simple with the inclusion of a self-cleaning function, which uses high temperatures to burn off food residues, reducing the need for harsh chemicals or extensive scrubbing. The smooth surface of the oven interior further simplifies the cleaning process.

Finally, the design of the Electrolux EK 5731 is both stylish and practical, featuring a sleek exterior that seamlessly fits into any modern kitchen décor. Its ergonomic design ensures ease of use, while the premium materials used in its construction promise durability and longevity.

In summary, the Electrolux EK 5731 is a multifunctional oven that combines advanced cooking technologies with user-friendly features, energy efficiency, and safety, making it an excellent choice for both everyday cooks and culinary enthusiasts alike.