DAILY USE
ACTIVATION AND
DEACTIVATION
Touch 
for 1 second to activate or deac- tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance automatically if:
•All cooking zones are deactivated ( 
).
•You do not set the heat setting after you activate the appliance.
•You spill something or put something on the control panel for more than 10 sec- onds, (a pan, a cloth, etc.). An acoustic signal sounds some time and the appli- ance deactivates. Remove the object or clean the control panel.
•The appliance becomes too hot (e.g. when, a saucepan boils dry). Before you use the appliance again, wait for the cooking zone to cool down.
•You use incorrect cookware. The symbol
comes on and the cooking zone de- activates automatically after 2 minutes.
•You do not deactivate a cooking zone or change the heat setting. After some time
comes on and the appliance deacti- vates. See below.
•The relation between heat setting and times of the Automatic Switch Off func- tion:
•
, 
- 
— 6 hours
•
- 
— 5 hours
•
- 
— 4 hours
•
- 
— 1.5 hours
THE HEAT SETTING
Touch the control bar at the heat setting. Change to the left or the right, if it is neces- sary. Do not release before you have a cor- rect heat setting. The display shows the heat setting.
ENGLISH 7
AUTOMATIC HEAT UP
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the diagram), and then decreases to the nec- essary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1.Touch 
( 
comes on in the dis- play).
2.Immediately touch the necessary heat
setting. After 3 seconds 
comes on in the display.
To stop the function change the heat set- ting.
12 |
|
|
|
|
|
|
|
|
|
|
11 |
|
|
|
|
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 13 14 |
|
POWER FUNCTION
The Power function makes more power available to the induction cooking zones. The Power function can be activated for a limited period of time ( see Technical infor- mation chapter). After that, the induction cooking zone automatically sets back to highest heat setting. To activate, touch 
, 
comes on. To deactivate, change the
heat setting.