
8 www.electrolux.com
POWER MANAGEMENT
The power management divides the power between two cooking zones in a pair (see the illustration). The power function increa- ses the power to the maximum level for one cooking zone in the pair. The power in the second cooking zone automatically de- creases. The heat setting display for the re- duced zone changes between two levels.
TIMER
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one time.
Set the Count Down Timer after the se- lection of the cooking zone.
You can set the heat setting before or after you set the timer.
•To set the cooking zone: touch
again and again until the indicator of a necessary cooking zone comes on.
•To activate the Count Down Timer:
touch
of the timer to set the time ( 00 - 99 minutes). When the indicator of the cooking zone start to flash slow, the time counts down.
•To see the remaining time: set the
cooking zone with
. The indicator of the cooking zone starts to flash quickly. The display shows the remaining time.
•To change the Count Down Timer: set the cooking zone with
. Touch ![]()
or .
•To deactivate the timer: set the cook-
ing zone with | . Touch |
| . The re- |
|
maining time counts back to 00 . The
indicator of the cooking zone goes out. To deactivate you can also touch
and
at the same time.
When the countdown comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.
•To stop the sound: touch ![]()
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
•To set the cooking zone (if more than 1 cooking zone operate ) : touch
again and again until the indicator of a necessary cooking zone comes on.
•To activate the CountUp Timer: touch
of the timer ![]()
![]()
comes on. When the indicator of the cooking zone starts to flash slow, the time counts up. The dis- play switches between ![]()
![]()
and counted time (minutes).
•To see how long the cooking zone
operates: set the cooking zone with 
. The indicator of the cooking zone starts to flash quickly. The display shows the time that the cooking zone operates.
•To deactivate the CountUp Timer: set the cooking zone with
and touch ![]()
or to deactivate the timer. The indica- tor of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder while the cooking zones do not operate. Touch
. Touch
or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes.
•To stop the sound: touch ![]()
STOP+GO
The
function sets all cooking zones that
operate to the lowest heat setting ( | ). |
When
operates, you cannot change the heat setting.
The
function does not stop the timer function.