Contents |
|
Description of the appliance | 3 |
Instruction for the User | 3 |
Cleaning and Maintenance | 4 |
Guarantee - After Sales Service | 5 |
Technical Data | 6 |
Instruction for the Installer | 6 |
Electrical Connection | 7 |
Adaptation to different |
|
types of gas | 8 |
Building In | 9 |
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation 
Hints and Tips
Environmentalinformation
Description of the appliance
1 2
1 Rapid Burner - 3,0 kW
2 Auxiliary Burner - 1,0 kW
3 Burner Control Knobs
3
Instruction for the User
Burner Control Knobs
The hob burner control knobs are situated on the hob front panel. The symbols on the knobs mean that :
there is no gas supply
there is maximum gas supply / Ignition setting there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a pan on the pan support.
1. Push the relevant knob down and turn it
2. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 1 lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.
3.Then, check the flame is regular and adjust it as required.
3