Electrolux 948, 949 manual Installation Instructions, Things YOU Need to Know, Getting Things Ready

Page 7

INSTALLATION INSTRUCTIONS

THINGS YOU NEED TO KNOW

WARNINGS:

￿This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.

￿This appliance must be earthed.

￿Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 8).

￿Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the front frame of the appliance and can be seen upon opening the door.

￿Do not alter the electrical circuitry of this appliance.

THINGS TO NOTE

￿This appliance is designed to be fitted in cabinets of the recommended dimensions as shown (Fig.3 and 4) without any modification to the cabinet.

￿If your cabinet interior dimension is between 565- 570mm the oven may still be fitted. However, a minor modification to the cabinet will be required.

￿The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

￿Enquiries regarding the installation of the cooker point, if required, should be made to your Regional Electricity Company to ensure compliance with their regulations.

￿The appliance socket switch should be outside the cabinet but within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.

￿To protect the hands, wear gloves when lifting the oven into its housing.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

GETTING THINGS READY

CHOICE OF ELECTRICAL CONNECTION

￿There are two possible ways to connect your appliance. Please choose from the most appropriate after reading the descriptions.

a)It is recommended that this appliance is wired with suitably rating cable (min 13 A), into fixed wiring using a double pole isolator with a least 3mm contact separation in all poles and neutral, located within 2m of the appliance. If this fixed wiring circuit is only supplying the appliance, then a fuse of 13A (or circuit breaker) should be incorporated. When the circuit combines oven and hob, then wire and fuse fuse rating should be increased accordingly.

Subject to Regional Electricity Companies regulations if you wish to connect the oven and hob to the power supply you may use one of the following two methods:-

b)If you wish to connect an oven and a hob to a cooker point you can:-

i.By connecting the appliance and hob separately to the cooker point. Oven and hob units should be separately connected to a control panel. In this case the appliance should be operated from 6mm² twin core, and earth, PVC insulated multicore cable. See Fig.1.

Fig. 1

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model EOB 948/949 Model NO. EOB 948/949 Technical DetailsContents Uses of the Fan Oven Selecting the Fan Oven During Operation SafetyGeneral After USEThings to Note Installation InstructionsThings YOU Need to Know Getting Things ReadyPreparing Cabinet for Fitting of Oven Built Under Installation Recommended Cabinet Dimensions in MillimetresPreparing Cable HOW to Finish UnpackingTools Required Making the Electrical ConnectionsConnecting to a HOB or Cooker Point Connecting to Mains TerminalChecking Electrical Connections Fitting Into the Cabinet Getting to Know Your Oven IntroductionABC D About Condensation and Steam General Notes on Using Your OvenControl Panel Indicator Neon Rating PlateGrill and Oven Furniture To SET the Time of DAY Oven TimerTo USE the Countdown Automatic Control Setting the Controls for Automatic USEGrill Hints and Tips Grill PAN and HandleTo FIT the Oven Shelves FAN OvenUses of the FAN Oven Selecting the FAN OvenHints and Tips FAN Oven Food Shelf Cooking Approximate Position Temp C Oven Cooking ChartMeat SECOND/FAN Cooking Time Oven Roasting ChartRoasting Chart Internal TemperaturesUses of Thermal Grilling Thermal GrillingSelecting Thermal Grilling Cooking Times Thermal Grilling ChartFood Shelf Temp Time Defrosting Uses of Defrost FeatureSelecting Defrost Meat Temperatures Helpful Hints When Buying and Preparing FoodRemoving and Replacing Wirework Side Runners Care and CleaningCleaning the Outside of the Appliance Cleaning Inside the OVEN/GRILLCooking to Reduce Soilage Cleaning the Grill and Oven FurnitureCare of Stayclean Surfaces Cleaning the Door GlassTo Replace the Outer Glass Cleaning Between the Outer and Inner Door GlassTo Clean the Inner Glass Door Panels To Remove the Outer GlassSomething not WORKING? Grill, oven and timer do not workSL1 1DZ Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsPage Page Important Notice

949, 948 specifications

The Electrolux 948 and 949 models are cutting-edge appliances that enhance the modern kitchen experience. Designed with user convenience and efficiency in mind, both models come equipped with an impressive array of features and technologies that set them apart in the competitive home appliance market.

One of the standout features of the Electrolux 948 and 949 is their advanced cooking technology. These models utilize induction cooking, which provides precise temperature control and faster cooking times compared to traditional gas and electric stoves. This technology not only enhances cooking efficiency but also ensures safety, as the cooktop remains cool to the touch, reducing the risk of burns.

The Electrolux 948 and 949 also boast a sleek, modern design that complements any kitchen décor. With intuitive touch controls and a responsive digital display, these models make cooking simpler and more enjoyable. They also feature built-in smart technology, allowing users to connect their devices for remote monitoring and control. With the Electrolux app, users can preheat their oven, set timers, and even receive notifications when their dish is ready.

Another key characteristic of the Electrolux 948 and 949 models is their spacious oven capacity. Both models come with multiple racks and large cooking surfaces, accommodating large family meals and special occasions. The ovens are equipped with a convection fan that ensures even cooking by circulating hot air throughout the interior, enhancing baking and roasting results.

Cleaning is made easy with the self-cleaning function available in both models. This innovative feature utilizes high temperatures to burn off food residue, leaving the oven clean without the need for harsh chemicals. The interiors are designed with smooth, easy-to-wipe surfaces, making maintenance a breeze.

In terms of energy efficiency, the Electrolux 948 and 949 are designed to be environmentally friendly. With energy-saving features and efficient performance, these appliances help reduce energy consumption compared to older models.

Overall, the Electrolux 948 and 949 offers a perfect blend of style, performance, and innovation. Their advanced cooking technologies, user-friendly features, and commitment to sustainability make them an ideal choice for any modern kitchen, appealing to both amateur cooks and culinary enthusiasts alike. The integration of smart technology further enhances the cooking experience, ensuring that users enjoy convenience and efficiency in their daily cooking routines.
Top Page Image Contents