Electrolux 6000K manual Operating the Hob, Ring Switches, Cooking on the Zones

Page 9

Operating the Hob

3 When a cooking zone is switched on, it may hum briefly. This is a char- acteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance.

Ring Switches

•The heat settings are continuously

variable between settings 1-9.

1 = lowest power

9 = highest power

Cooking on the Zones

1.Select a high setting for heating up

/ browning.

2.As soon a steam starts to form or

the oil is hot, turn back to the heat setting necessary for further cooking.

3.To stop cooking, turn back to the

zero position.

2 Switch off the cooking zone approx.

5-10 minutes before the end of the

cooking to make use of the residual heat. By this means you can save electricity.

31

Image 9

Contents 6000K Dear customer Following symbols are used in the textContents Electrical Safety SafetyChild Safety Safety During UseTo Avoid Damaging Your Appliance Safety When CleaningDisposal Key Features of Your ApplianceDisposing of the packaging material Disposal of old appliancesCooking zones and control panel Description of the ApplianceInitial Cleaning Before Using for the First TimeRing Switches Operating the HobCooking on the Zones Residual heat indicator Uses, Tables and Tips PansEnergy saving tips Parboiling Settings for Cooking on the RingsHob Cleaning and CareLight Soiling Stubborn SoilingHob Frame Problem DirtRectifying faults What to do when …What to do if … Technical Data Appliance dimensions Worktop cut-out dimensionsCooking rings Regulations, Standards, Directives Safety Instructions for the Installer Electrical Connection Page When do you incur costs even during the warranty period? Is it a technical fault?Montage / Assembly Page Page Page Nur für Werk Hier Typenschild aufkleben