Electrical installation

The electrical connection may only be performed by a qualified electrician/ competent person. The electrical connection must be carried out in accordance with prevailing regulations for appliances using heavy current. The connection must comply with any specific requirements specified by the local electricity supply authority.

There must be no interference with any of the unit’s electrical parts.

The cable is mounted in the pegs as
shown.
Unscrew the cover while connecting
the cables.
A unit led directly to the power point
or the outlet rose.
More units may be connected via one
or more junction boxes.	Cover
The cable must be connected via an
external switch with a contact
separation of at least 3 mm in each
pole.

Please observe these instructions, otherwise the warranty will not cover any damage that may occur.

Single-phase zero-earth Cable type 1,5 mm² HO5VV-F. The cable outside diameter must be between 7,5 and 10,5 mm.

Check whether your cooking utensils has level bases by placing the item in question upside down on a work top and positioning a ruler on the base. A curved base, both inwards and outwards, will prolong the cooking time and increase the energy consumption. If the diameter of the base is too small, the energy consumption will increase, and any food boiling over will burn onto the hot cooking zone.

Cooking utensils with very shiny/bright bases will prolong the cooking time slightly compared with cooking utensils with matt/dark bases.