Electrolux C 8 18 43 i Something Not Working, Symptom Possible Cause Remedy

Page 15

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

 

 

Appliance is not switched on

 

 

 

 

 

Mains plug is not plugged in

Appliance does not work.

 

or is loose.

 

 

 

Fuse has blown or is defective.

 

 

 

 

 

 

 

 

 

 

Socket is defective.

 

 

 

 

 

 

Appliance cools too much.

 

Temperature is set too cold.

 

 

 

 

 

 

 

Temperature is not properly

 

 

adjusted.

 

 

 

 

 

Door was open for an exten-

 

 

ded period.

The food is too warm.

 

 

 

A large quantity of warm food

 

 

was placed in the appliance

 

 

within the last 24 hours.

 

 

 

 

 

The appliance is near a heat

 

 

source.

Interior lighting does not work. Light bulb is defective.

Switch on the appliance.

Insert mains plug.

Check fuse, replace if neces- sary.

Electrical malfunctions are to be corrected by an electrician. Turn the temperature control knob to a warmer setting.

Please look in the "Initial Start Up" section.

Only Oopen the door as long as necessary.

Turn the temperature control knob to a colder setting.

Please look in the "Installation location" section.

Please look in the "Changing the Light Bulb" section. Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than

Heavy build up of frost, possi- bly also on the door seal.

The compressor does not start immediately after changing the temperature setting. Water on the floor or on sto- rage shelves.

Door seal is not air tight (pos- sibly after reversing the door).

This is normal, no error has occurred.

Water drain hole is blocked.

approx. 50 °C). At the same time shape the warmed door seal by hand until it sits cor- rectly.

The compressor starts after a period of time.

See the "Cleaning and Care" section.

15

Image 15 Contents
Santo C 8 18 43 Who thinks ecologically acts accordingly Dear customerContents Prior to initial start-up SafetySafety of children Intended useAppliance Packaging Information ServiceDisposal Daily OperationDisposal of old Appliances Remove transport packagingStarting up and temperature regulation Operating and Indicator panelVariable Storage Box Interior AccessoriesStorage Shelves Variable Inner DoorMoisture regulator Freezing and storing frozen food Fresh food refrigeration Ice pack Preparation of Ice Cubes There are two ice packs in one drawer of the freezer Symbols on the drawers show different types of frozen goods Freezing CalendarDefrosting Switching off the appliance Cleaning and CareNever use metal tools to scrape off the frost Energy Saving Tips Something Not Working Symptom Possible Cause RemedyChanging the light bulb Service and Spare Parts 0870 5Customer Care Department Guarantee Conditions Guarantee ConditionsElectrical Connection InstallationHousing dimensions PositioningYour appliance needs air Regulations, Standards, Guidelines III Einbauanweisung Click XIV XVI Page Page 2222