Electrolux C 8 18 43 i Operating and Indicator panel, Starting up and temperature regulation

Operating and Indicator panel

A B CD

A. Light button

B. Pilot light fast-freeze

C. Fast freeze button

D. Temperature control knob and ON/OFF switch

The temperature control knob (D), which is also the appliance’s On-/Off switch.

The yellow pilot light (B) comes on when the fast freezing button (C) has been operated. The refrigerating unit then operates continuously.

Important note: if you operate the fast-freeze switch or adjust the tempe- rature control knob, the motor might not start immediately. This does not mean that your appliance has a fault.

Starting up and temperature regulation

Wash the inside of the appliance with lukewarm water with a little bicar- bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry the appliance thoroughly.

•Turn the temperature control knob (D) in the direction of “1“.

•Operate the fast-freeze button (C). The yellow pilot lamp (B) comes on. Setting “•”: Off.

Setting “1”: Hightest temperature, (warmest setting).

Setting “4” (end-stop) :Lowest temperature, (coldest setting).

The exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on:

-the quantity of food stored

-how often the door is opened

The temperatures in the refrigerator compartment and freezer compart- ment cannot be independently regulated.

7