Electrolux SANTO 70312 manual Plug the mains plug into the mains socket

Page 12

DESIRED temperature means:

The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers.

Temperature display

The temperature display can indicate several pieces of information.

•During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed.

•When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1.Plug the mains plug into the mains socket.

2.Press ON/OFF button. The green mains pilot indicator illuminates. The alarm light flashes since the temperature is reached. The buzzer sounds.

3.Pressing button “N” the buzzer stops.

4.Press either the “J“ or “L“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

5.Set the required temperature by pressing the “J“ or “L“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperatu- re is adjusted by 1 °C.

From a food safety point of view -18 °C should be considered sufficiently cold for storing food in the freezer.

6.The alarm light,when the set temperature is reached. Press the alarm but- ton to turn off the buzzer.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Santo 70312-1 KG Dear customer Contents Safety Safety of childrenPrior to initial start-up RefrigerantRemove Transport Packaging To remove them proceed as followsService DisposalDaily Operation Appliance Packaging InformationTemperature setting buttons Temperature displayOperation and control panel Fridge Starting Up Setting the Temperature Holiday functionInterior Accessories Storage shelvesHumidity control To turn on the holiday function, press button CFresh food refrigeration DrawerDrawer is suitable for storing SurfaceOperating and indicator panel freezer Plug the mains plug into the mains socket Pressing button N the buzzer stopsAlarm reset button Switching the Appliance offFreezing and storing frozen food Symbols on the drawers show different types of frozen goods Preparation of Ice CubesFreezing Calendar Defrosting RefrigeratorCleaning and Care Do not use any abrasive cleansersAfter cleaning wipe with fresh water and rub dry Energy Saving TipsWhat to do if Correcting MalfunctionsChanging the light bulb Light bulb data 220-240Put the refrigerator back into opera- tion Service and Spare Parts 0870 5Customer Care Department Guarantee Conditions Installation Electrical ConnectionRear spacers PositioningReversing the door Slide the bottom door off the centre hinge HRefit the bottom door Refit ventilation grille D, clipping it into placeRegulations, Standards, Guidelines Page AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents