Electrolux SANTO 70312 manual Starting Up Setting the Temperature, Holiday function

Page 8

During normal operation, the temperature currently present in the fridge (ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the fridge temperature currently set (DESIRED temperature).

Starting Up - Setting the Temperature

1.Plug the mains plug into the mains socket.

2.Press ON/OFF button. The green mains pilot indicator illuminates. The appliances start.

3.Press either the “C“ or ”E“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

4.Set the required temperature by pressing the “C“ or “E“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperatu- re is adjusted by 1 °C.

From a food safety point of view +5 °C should be considered sufficiently cold for storing food in the fridge.

5.Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the stora- ge temperature within the fridge is reached quickly you can store food immediately after switching on.

COOLMATIC

The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator.

1.The COOLMATIC function is switched on by pressing the COOLMATIC but- ton. The yellow light illuminates.

The COOLMATIC function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The COOLMATIC function is ended automatically after a period of 6 hours.

2.The COOLMATIC function can be ended manually at any time by pressing the COOLMATIC button again. The yellow light goes out.

Holiday function

The holiday function sets the temperature at +15°C. This function allows you to keep the refrigerator shut and empty during a long holiday period (e.g. the summer holidays) without the formation of a bad smell.

8

Image 8
Contents Santo 70312-1 KG Dear customer Contents Safety Safety of childrenPrior to initial start-up RefrigerantRemove Transport Packaging To remove them proceed as followsService DisposalDaily Operation Appliance Packaging InformationOperation and control panel Fridge Temperature setting buttonsTemperature display Starting Up Setting the Temperature Holiday functionInterior Accessories Storage shelvesHumidity control To turn on the holiday function, press button CFresh food refrigeration DrawerDrawer is suitable for storing SurfaceOperating and indicator panel freezer Plug the mains plug into the mains socket Pressing button N the buzzer stopsAlarm reset button Switching the Appliance offFreezing and storing frozen food Freezing Calendar Symbols on the drawers show different types of frozen goodsPreparation of Ice Cubes Defrosting RefrigeratorCleaning and Care Do not use any abrasive cleansersAfter cleaning wipe with fresh water and rub dry Energy Saving TipsWhat to do if Correcting MalfunctionsPut the refrigerator back into opera- tion Changing the light bulbLight bulb data 220-240 Customer Care Department Service and Spare Parts0870 5 Guarantee Conditions Installation Electrical ConnectionRear spacers PositioningReversing the door Slide the bottom door off the centre hinge HRefit the bottom door Refit ventilation grille D, clipping it into placeRegulations, Standards, Guidelines Page AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG