Electro-Voice CP3000S owner manual Safety Component Must be Replaced by Original Part

Page 3
IMPORTANT SERVICE INSTRUCTIONS
These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that ontained in the Operating Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated „dangerous voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

 

 

 

 

The exclamation point within an equilateral triangle

 

 

 

 

is intended to alert the user to the presence of

1.

 

Read these instructions.

important operating and maintance (servicing)

 

instructions in the literature accompanying the

2.

 

Keep these instructions.

appliance.

3.

 

Heed all warnings.

 

4.

 

Follow all instructions.

 

5.

 

Do not use this apparatus near water.

 

6.

 

Clean only with a dry cloth.

 

7.

 

Do not block any ventilation openings. Install in accordance with the manufactures instructions.

8.

 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

 

 

(including amplifiers) that produce heat.

 

9.

 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

 

 

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide

 

 

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

 

 

electrican for replacement of the absolete outlet.

 

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

 

 

and the point where they exit from the apparatus.

 

11.

Only use attachments/accessories specified by the manufacturer.

12.

Unplug this apparatus during lightning storms or when unused for long periods of time.

13.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

 

 

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

 

 

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14.

Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases,

 

 

are placed on the equipment.

 

15.

To completely disconnect this equipment from the AC Mains, disconnect the power supply cord plug from the AC

 

 

receptacle.

 

16.

The mains plug of the power supply cord shall remain readily operable.

CAUTION:

1.Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSA E65 - 94 have to be obeyed when servicing the appliance.

2.Use of a mains separator transformer is mandatory during maintenance while the appliance is opened, needs to be operated and is connected to the mains.

3.Switch off the power before retrofitting any extensions, changing the mains voltage or the output voltage.

4.The minimum distance between parts carrying mains voltage and any accessible metal piece (metal enclosure), respectively between the mains poles has to be 3 mm and needs to be minded at all times. The minimum distance between parts carrying mains voltage and any switches or breakers that are not connected to the mains (secondary parts) has to be 6 mm and needs to be minded at all times.

5.Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible when using original parts.

6.Altering the circuitry without prior consent or advice is not legitimate.

7.Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly obeyed. This applies also to any regulations about the work place itself.

8.All instructions concerning the handling of MOS - circuits have to be observed.

NOTE:

SAFETY COMPONENT ( MUST BE REPLACED BY ORIGINAL PART )

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OWNER‘S Manual Bedienungsanleitung Mode D‘EMPLOI Matières ContentsSafety Component Must be Replaced by Original Part Description FCC Information U.S.A Unpacking & Warranty Installation NotesFront Panel Parallel Rear PanelInput a / Input B NF-CONNECTION CordsMains Power Amplifier Output ConnectorsBridged Mode GROUND-LIFT SwitchMains Operation & Resulting Mains Operation & Resulting Power AMP TemperaturesPage Bedienungsanleitung Inhalt Wichtige Sicherheitshinweise Beschreibung Auspacken & Garantie InstallationshinweiseFrontseite NF-VERBINDUNGSKABEL RückseiteNetzeingang GROUND-LIFT SchalterNetzbetrieb & Wärmeentwicklung in DER Endstufe Netzbetrieb & WärmeentwicklungPage Mode D‘EMPLOI Matières Importantes Informations DE Sécurité Description Déballage ET Garantie Remarques Concernant L’INSTALLATIONFace Avant Cordons DE Connexion Audio Panneau ArrièreEntrée Secteur Mode BridgedConnecteurs DE Sortie DE L‘AMPLIFICATEUR DE Puissance Commutateur GROUND-LIFTFonctionnement SUR LE Secteur ET Températures Résultantes CP3000S SpecificationsBlock Diagram Dimensions Page Page Page USA

CP3000S specifications

The Electro-Voice CP3000S is a power amplifier that stands out for its innovative design and robust performance, making it a popular choice among audio professionals. Known for its high power output and reliability, the CP3000S is an ideal solution for large venues, installations, and live sound applications.

One of the main features of the CP3000S is its impressive power output. With a capability of delivering 3000 watts at 4 ohms, it can easily drive multiple loudspeakers, making it suitable for both small and large audio systems. The amplifier is also designed to operate efficiently, providing consistent performance without the risk of overheating, thanks to its advanced thermal management system.

The CP3000S incorporates a proprietary switch-mode power supply technology, which not only ensures lightweight construction but also enhances the amplifier’s ability to deliver high transient response. This technology contributes to the dynamic sound reproduction, allowing for deep bass and articulate highs, essential for any high-quality sound system.

In terms of connectivity, the CP3000S offers a range of inputs and outputs that ensure compatibility with various audio sources and loudspeakers. Its XLR and 1/4-inch inputs provide versatile connection options, while the Speakon output connectors facilitate secure connections to loudspeakers.

Another notable characteristic of the Electro-Voice CP3000S is its built-in protection circuitry. This feature helps prevent damage to both the amplifier and the connected speakers by monitoring voltage and current levels, automatically adjusting as necessary to avoid clipping or overheating. This protective measure is critical in maintaining the longevity of equipment and ensuring uninterrupted performance during events.

Additionally, the amplifier features a comprehensive front panel with LED indicators that provide real-time feedback on the system's status, including signal presence, clip, and thermal status. This allows audio engineers and technicians to monitor performance at a glance.

The rugged construction of the CP3000S is designed for touring and permanent installations alike, featuring a durable chassis that can withstand the rigors of transport and demanding environments. Its design emphasizes ease of use, making setup and operation straightforward for audio professionals.

In summary, the Electro-Voice CP3000S combines powerful amplification, advanced technology, and robust construction, making it a superior choice for those seeking reliable and high-performance sound reinforcement in various audio applications.
Top Page Image Contents