Starting up and temperature regulation

HAlarm light

IAlarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. after a power cut) warning light (H) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (H) will continue to flash, although the buzzer has stopped.

When the alarm button (I) is pressed, the warmest temperature reached in the compartment flashes on the display (D).

Sound signal alarm with open door

This appliance incorporates an alarm which gives off a sound signal when the door remains open for more than 60 seconds. The signal can be stopped by closing the door.

Starting up and temperature regulation

Please clean the appliance interior and all accessories prior to starting the appliance. Plug in the appliance at the mains supply.

•Press the button ON/OFF (B). The freezer is switched on. The freezer is pre- set to run at -18°C. this temperature will be reached in a few hours.

•As soon as the appliance is switched on the temperature display (D) shows the current temperature inside the appliance, the alarm reset light (H) fla- shes and a buzzer sounds.

•Press the alarm reset button (I).

•The buzzer stops and the alarm light (H) continues to flash until the set- ting temperature is reached.

Ice pack

There are two ice packs in one drawer of the freezer.

In the event of a power failure or malfunction, the ice pack will lengthen the amount of time it takes for the frozen food to become too warm by several hours. The ice pack can only fulfil this task efficiently if it is placed in the uppermost drawer, at the front, above the frozen food. You can use the ice pack for cooling cold bags.