Electrolux G 9 18 50-4 i Positioning, Your appliance needs air, Reversing the door

Page 18

Positioning

This appliance should only be installed at a location where the ambient tem- perature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T +18°C to + 43°C

Your appliance needs air

For safety reasons, minimum ventila- tion must be as shown Fig.

Attention: keep ventilation openings clear of obstruction;

50 mm

min.

200 cm2

 

min.

 

200 cm2

D567

 

Reversing the door

The side the door opens can be changed from the right side (factory adjust- ment) to the left side, if the installation site requires.

Warning! When changing the side the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.

18

Image 18
Contents Arctis G 9 18 50-4 Dear customer Contents Intended use SafetySafety of children Prior to initial start-upDaily Operation Case of malfunctionAppliance Packaging Information Remove transport safeguardDisposal Disposal of old AppliancesOperating and indicator panel Temperature setting buttonsTemperature display Starting Up Setting the TemperatureIce pack Alarm reset button Switching the Appliance offFreezing and storing frozen food Preparation of Ice Cubes Cleaning and Care Storage Goods Symbols/Freezing CalendarSwitching off the appliance DefrostingDo not use any abrasive cleansers Energy Saving TipsWhat to do if Correcting MalfunctionsUnusual noises Appliance is near a heat source Service and Spare Parts Customer Care DepartmentGuarantee Conditions Installation Electrical ConnectionPositioning Your appliance needs airReversing the door Housing dimensions Regulations, Standards, GuidelinesCopyright by AEG