Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use is affected by the ambient temperature. The appliance should therefore

Ðnot be exposed to direct sunlight;

Ðnot be installed next to radiators, cookers or other sources of heat;

Ðonly be installed at a location whose ambient temperature corre- sponds to the climate classification, for which the appliance is desi- gned.

The climate classification can be found on the serial plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

Climate classification		for an ambient temperature of


SN		+10 to +32 ¡C

N		+16 to +32 ¡C

Your appliance needs air

Air flows in from under the door, at the front, and flows out upwards, over the back. For correct air circulation, it is important that the ventilation openings are not covered or obstructed.

Important If the appliance is positioned under a kitchen wall unit, a minimum clearance of 10 cm must be left between the top of the appliance and the overhanging wall unit.