Electrolux EOG 7330 manual Getting Things Ready, Preparing Cabinet for Fitting Oven

Page 34

INSTALLATION INSTRUCTIONS

This appliance must not be installed on a wooden base.

The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN30.

GETTING THINGS READY

PREPARING CABINET FOR FITTING OVEN

Make sure the cabinet is the correct size for the appliance to be fitted (Ref. Fig. 4).

If the size is between 605-610mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 600-605mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

The adjacent cabinets must be stable and firmly secured to the wall or floor. If necessary, make arrangements to ensure the work surface below which the oven will rest is level.

Mark the centre of the aperture into which the appliance is to be fitted onto the plinth board.

Remove the plinth board from in front of the cabinets.

Cut the required ventilation slot in the plinth as detailed in Fig.5.

Drill two pilot screw holes into the sides of the adjacent cabinets, in the position indicated by Fig. 4.

Fit the appliance mounting brackets using the two holes indicated in Fig. 6 to the adjacent cabinets (Ref. Fig.4 & 7).

Check that the mounting brackets are level. They can be adjusted if necessary by using the extra holes at the ends of the brackets. Once the brackets are level, drill a pilot hole through the central hole in the bracket and fit the remaining screw.

Fig.4

Fig.5

Fig. 6

Fig.7

34

Image 34

Contents Model EOG Important Safety Information Contents Built in gas oven and grill Description of the ApplianceControl Panel Getting to Know Your OvenCooling FAN for the Controls LocationWhen First Switching on Before Using the ApplianceConnecting to the Electricity Supply Rating PlateCondensation and Steam Preparing to USE Your ApplianceCookware Grill and Oven Furniture HOW to SET the Time of DAY Electronic TimerHOW to SET the Countdown Setting the Oven Timer Control To Cancel the CountdownTo SET the Timer to Switch on and OFF Automatically To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Things to Note Automatic CookingUses of the Grill HOW to Light the GrillGrill To Turn OFF the Grill BurnerGrill Shelf Grill PAN and HandleHints and Tips Grilling Chart PositionUses of the Oven HOW to Light the OvenOven To Turn OFF the OvenTo FIT the Oven Shelves Roasting Oven Cooking Chart Food Shelf GAS Mark Setting PositionHOW to USE Slowcook Slowcook FeatureUses of Slowcook Cleaning the Outside of the Appliance Care and CleaningCleaning Materials Cleaning the Control Knobs and HandlesCleaning the Outer and Inner Door Glass Panels To Remove the Outer Door GlassCleaning Inside the Grill and Oven Compartments To Clean the Inner Glass DoorTo Replace the Outer Door Glass To Remove the Wirework Runners Cooking to Reduce SoilageReplacing AN Oven Light Bulb Something not Working Oven light fails to illuminate Service and Spare Parts Guarantee Conditions Standard guarantee conditionsGAS Category Countries of Destination Important Safety RequirementsTechnical Details Provision for VentilationInstallation Instructions Things YOU Need to KnowGetting Things Ready Preparing Cabinet for Fitting OvenFlexible Pipe Installation Fitting the Appliance and CabinetConnection to Electricity Supply Installation Between Cabinets Checking the Electrical ConnectionsChecking the Grill Pressing TestingChecking the Oven Page Electrolux