Electrolux EKG6046/EKG6047 Connecting to the Electricity Supply, If a moulded plug is fitted

Page 33

CONNECTING TO THE ELECTRICITY SUPPLY

Warning: This appliance must be earthed. Do not earth this appliance to the gas supply piping.

Connect to 230-240 A.C supply only.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket. Which is adjacent to, but not directly above and not more than 1.7m away from the appliance and capable of electrical isolation. The cooker point should be within 1.7m of the appliance to make it accessible to switch off the appliance in case of emergency. The mains lead should be routed so that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor. Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

If the supply cord is damaged, it must be replaced. Please contact your local Service Force Centre.

If the moulded plug is cut from the cable for any reason it must be destroyed or disposed of safely, as protruding wires will be an electrical shock hazard.

If the fitted plug is removed.

The flexible mains lead must be correctly connected as below to three pin plug of not less than 13amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a 3 amp fuse which is approved to B.S. 1362.

Important: The wires in the mains lead fitted to the appliance are coloured in accordance with the following code.

GREEN AND YELLOW -EARTH

BLUE-NEUTRAL

BROWN-LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:-

The wire which is coloured green and yellow must be connected to the terminals in the plug which is marked with the letter E or by the earth symbol ( ) or coloured green or green and yellow. The wire which is coloured blue, must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown, must be connected to the terminal, which is marked with the letter L or coloured red.

Ensure that the cable does not become trapped when pushing the appliance into position.

If a moulded plug is fitted.

In the event of replacing a fuse in the plug supplied a 3 amp ASTA approved fuse to B.S. 1362 must be fitted.

Note: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Model EKG6046/EKG6047 Installation Important Safety InformationChild Safety Cleaning and MaintenanceContents SLIP-IN GAS Double Oven Description of the ApplianceFeatures Getting to Know Your ApplianceControl Panel Before Using the Appliance HOW to SET the Countdown TimerTo Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Things to NoteHOB Using the HOBTo Light the HOB Burners To Turn OFF ANY BurnerHints and Tips Grill Using the GrillGrill PAN and Handle Ensure the handle is correctly locatedGrilling Chart Always remove the grill pan handle during grillingMins in total TOP Oven Using the TOP OvenPreheating To FIT the TOP Oven ShelfHints and Tips Main Oven Using the Main OvenHeat Zones To FIT the Main Oven ShelvesHints and Tips Gas Cooking ChartMark Mark Cook Time minCooking Time Roasting ChartUsing Slow Cook Slow CookFood Preparation Slow Cooking Vegetables Cleaning Materials Care and CleaningCleaning the Outside of the Appliance Cleaning the Control Knobs and HandlesCleaning the HOB When Replacing Hotplate Burner PartsCleaning the Grill Aerosol cleaners must not be used on Stayclean surfaces Cleaning Inside the Grill and Oven CompartmentsCleaning the Doors Cleaning Between the Outer and Inner Door GlassTo Replace the Outer Glass Replacing AN Oven Light Bulb Something not WORKING? ProblemService and Spare Parts This guarantee does not cover Guarantee ConditionsTechnical Details DimensionsInstallation Instructions Important Safety RequirementsProvision for Ventilation Moving Your Appliance For Your SafetyLocation of Appliance Levelling the ApplianceConnecting to the Electricity Supply Connect to 230-240 A.C supply onlyIf a moulded plug is fitted Connecting to GAS Supply Pressure TestingFitting the Stability Chain Checking the Hotplate Checking the GrillChecking LID SHUT-OFF Device Checking the Second OvenChecking the Main Oven Light Checking the Main OvenTo SET the Time of DAY General NotePage Page Page Electrolux Major Appliances Addington WAY Luton Bedfordshire
Top Page Image Contents