Care & Cleaning Table

Before cleaning any part of the drawer, be sure control is turned OFF and the drawer is

COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGU- LAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.

	Surfaces							How to Clean

	Plastic							Clean with a cloth soaked in soapy water. Rinse with a clean water and a
	Membrane Keypad							dishcloth.
								Note: Humidity controller knob can not be removed .

	Stainless Steel							Cleaners made especially for stainless steel are recommended. Always
	Door & Drawer Body							follow the manufacturer's instructions. Be sure to rinse the cleaners. DO
								NOT clean the door gasket. The door gasket is essential for a good seal.
								Care should be taken not to rub, damage or remove the gasket.

	Porcelain Enamel							Gentle scouring with a soapy scouring pad will remove most spots. Rinse
	Body Parts and Cavity							with a 1:1 solution of clear water and ammonia. If necessary, cover difficult
								spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with
								clean water and a damp cloth, and then scrub with a soap-filled scouring
								pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the
								porcelain may become damaged during future heating. DO NOT use spray
								oven cleaners.

	Warmer Drawer Rack							The rack may be removed for cleaning. Clean by using a mild, abrasive
								cleaner following manufacturer's instructions. Rinse with clean water and dry.

CARE & CLEANING TABLE