Electrolux Z 91200-4 i manual Remove Transport Packaging, Installation Location, Be ensured

Page 7

Remove Transport Packaging

The appliance and the interior fittings are protected for transport. ☞1. Pull off the adhesive tape on the left and right side of the door.

2.Remove all adhesive tape and packing pieces from the interior of the appliance.

Installation

Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by the ambient temperature.

The appliance should therefore

–not be exposed to direct sunlight;

–not be installed next to radiators or other sources of heat;

–only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed.

The climate classification can be found on the serial plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

Climate classification

 

for an ambient temperature of

 

 

 

 

 

 

SN

 

+10 to +32 °C

 

 

 

 

 

 

N

 

+16 to +32 °C

 

 

 

 

 

 

ST

 

+18 to +38 °C

 

 

 

 

 

 

T

 

+18 to +43 °C

 

 

 

Installation directly under a hob is not allowed. The temperatures of the hob, which in part are quite high, may damage the appliance.

If a hob is installed near the appliance, the corresponding installation and safety instructions must be adhered to. Considering the numerous installation conditions which are possible, there is no way of providing detailed information here.

It is necessary to avoid overheating of the refrigerator by maintaining adequate distances from heat sources and by the use of a suitable thermal insulation plate. Proper ventilation of the appliance must also

be ensured.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Santo Dear customer Contents Prior to initial start-up Important Safety InstructionsRefrigerant Case of malfunction Important Safety InstructionsSafety of children Daily OperationDisposal DisposalAppliance Packaging Information Disposal of Old AppliancesBe ensured InstallationInstallation Location Remove Transport PackagingIntegratable models i-appliances InstallationDimensioned drawing Your Refrigerator Needs Air220 ~50 Hz Power SupplyGreen and Yellow Earth BlueNeutral BrownLive Electrical ConnectionView of the Appliance Description of the ApplianceControl Panel Temperature Setting ButtonsDescription of the appliance Your appliance is equipped with a Temperature DisplayTher improved Close the flap Installation of the charcoal filterChanging the charcoal filter Prior to Initial Start-Up Starting Up and Temperature RegulationStandby time Turbo Coolmatic Button Switching Off the ApplianceHeight of the storage shelves can be adjusted Interior AccessoriesStorage Shelves Variable Inner Door Longfresh 0C CompartmentBottle Holder Drawers Humidity ControlLongfresh 0C compartment Tips Correct StorageSalad, vegetables Correct StorageAnimal food always store packed and dry Defrosting Cleaning and CareFridge Defrosts Automatically Energy Saving Tips After everything is dry switch the appliance back onWhat to do if Symptom Possible Cause RemedyWhat to do if Correcting MalfunctionsHumming Noises During OperationChanging the Light Bulb ClicksTechnical terminology Regulations, Standards, GuidelinesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc

Z 91200-4 i specifications

The Electrolux Z 91200-4 i is a vacuum cleaner that embodies innovation, efficiency, and user-friendly design. This model is specifically crafted to cater to the needs of modern households, providing powerful cleaning capabilities without compromising on convenience and versatility.

One of the main features of the Electrolux Z 91200-4 i is its advanced suction technology, which delivers exceptional cleaning performance across various surface types. The appliance is equipped with a robust motor that generates strong suction power, enabling it to remove dirt, dust, and allergens with ease. This makes it an ideal choice for homes with pets and allergy sufferers, as it effectively captures microscopic particles and improves indoor air quality.

Another key characteristic of the Z 91200-4 i is its innovative filtration system. This vacuum cleaner uses a multi-stage filtration process designed to trap even the smallest particles. The HEPA filter is especially beneficial, ensuring that the air released back into the home is clean and free from allergens. This feature is essential for maintaining a healthy living environment.

The design of the Electrolux Z 91200-4 i also prioritizes user convenience. It features a lightweight and compact structure, making it easy to maneuver around the house and store away when not in use. The vacuum is equipped with ergonomic handles and adjustable heights which enhance user comfort during operation. In addition, its 360-degree rotating hose and various attachments, including upholstery and crevice tools, allow for thorough cleaning in hard-to-reach areas.

Furthermore, the Z 91200-4 i incorporates noise reduction technology, ensuring a quieter operation compared to traditional vacuum cleaners. This enhances the overall cleaning experience, allowing users to clean their homes without disturbing others.

Overall, the Electrolux Z 91200-4 i stands out in the market for its combination of powerful performance, advanced filtration, user-friendly design, and quiet operation. It is a versatile and efficient cleaning solution that meets the demands of today’s households, promoting a clean and healthy living space while simplifying the cleaning process. With its thoughtful features and reliable technology, this model is an excellent investment for anyone looking to enhance their cleaning routine.
Top Page Image Contents