Instalation

1.Install the unit on a strong and level surface. Leveling can be obtained by using the adjusting screws on the bottom of the unit. For proper performance the front of the refrigerator “Cabinet” should be slightly higher than the back.

2.Allow at least 30 cm. space above the unit, 15 and 10 cm. at the back and sides to allow air ventilation.

3.Place the unit away form direct sunlight or heat from stoves.

4.Place the unit away from sinks and water faucets.

5.Provide the unit with its own electrical outlet (230V, 60 Hz, single phase AC). Never plug your refrigerator simultaneously with other appliances. Never use multipurpose adapter.

6.Attach the ground wire (Green/yellow color wire located at the lower left portion at the back of the refrigerator) to any metal pipe or to a cover screw of the wall receptacle or to a rod buried at least 2.4 meters. in the ground.

10 cm.

30 cm.

15 cm.