INSTRUCTIONS FOR THE INSTALLER
TECHNICAL DATA
DIMENSIONS
WEIGHT | 35 KG |
GROSS CAPACITY: | Fresh Food Comp. |
| |
NET CAPACITY: | Fresh Food Comp. |
POWER SUPPLY VOLTAGE & FREQUENCY TOTAL POWER ABSORBED
ENERGY CONSUMPTION: PER DAY PER YEAR
ENERGY CLASS (According to EU standards)
STAR RATING OF FROZEN FOOD COMPARTMENT
INSTALLING THE APPLIANCE
Transportation and unpacking
The appliance and the interior fittings are protected for transport.
Remove all packaging and adhesive tape.
Any remnants of packaging can be removed using white spirit.
After transportation the appliance must not be switched on for 2 hours, this is to allow the refrigerant to settle.
Cleaning
Wash the inside of the appliance with lukewarm water to which a little bicarbonate of soda has been added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.
Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol.
Height | 850 mm |
Width | 550 mm |
Depth | 600 mm |
137l
20l
118l
20l
100W
0.75 kWh
274kWh
C
**
Location
The appliance should be positioned in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should therefore:
Not be installed next to radiators, cookers or other sources of heat.
Only be installed at a location where the ambient temperature corresponds to the climate classification, for which the appliance is designed.
The climate classification can be found on the rating plate.
The following table shows which ambient temperature is correct for each climate classification.
Climate Classification Ambient Temperature
SN | +10 to +32°C |
N | +16 to +32°C |
|
|
ST | +18 to +38°C |
14